>>>Last few parts from my dead Cossie, please make any offer<<<<
29-03-2009, 09:15 PM
#1
>>>Last few parts from my dead Cossie, please make any offer<<<<
11 th December 2010 - Last of my old Cossie stuff, please take a nosey through and make me a sensible offer on anything you see below 
IF NOT LISTED IN WRITING I DON’T HAVE IT ANYMORE SORRY, SOME PICS SHOW SOLD ITEMS NEXT TO ITEMS THAT ARE LEFT
As well as the items below I have a 4x4 Cossie propshaft in the shed, make me an offer!
4x4 Gearbox mount £5
3 * Left hand clear side repeaters with springs. Not cracked. £5 each
Motorcraft coolant cap £4 posted
Pair of Flint Grey electrically heated and adjustable mirrors from my Saph £40
9 * Flywheel bolts £5
4*4 Dizzy cap £5
Saph bonnet vent shield thing £5
Oil pump drive pulley £10 (ONLY THIS ITEM LEFT - it's the pulley on the very left of this pic)
Oil sensor £10
4*4 Through sump driveshaft £20
Ported / flowed / fettled by Cylinder Head Developments Inlet manifold, powder coated silver. Inlet tract no 1 cracked when I hung the inlet on the car with no support for a while, this has since been welded up. £20
New in box Motaquip VCVU800 front inner CV gaiter, 105mm long, 65 & 25mm ends £10 DELIVERED
Delphi Borg & Beck HD5526 Clutch release bearing £20
Cosworth parking sign, brand new £15
ETB Oil temp, Tim oil £5 each RACETECH SOLD
Gear knob, grub screw fitting, left hand side one in the pic only £5 MOMO one on the right has now SOLD
Unused steering wheel boss kit for Mk3 Fiesta Mk5 Escort £20 This may have sold, need to check!
Dizzy caps, 3 * 2wd ones £5 each
2.5 Escort Cossie map sensor, brand new in bag £50 The one in the bag, not the old 3 bar next to it!
Dizzy rotor arms, 1 left £3
Denso Iridium IK31 COSSIE Spark plugs, little use £20
Cossie rocker cover bolt kits, black £2
3 in total x 4*4 Cos Gearbox support cradles (1 comes with a bush) £15 each
Cometic exhaust manifold gaskets, 3000 miles old £5
Cos rear diff hanger, 18 years old I bet, worked fine though £10
4*4 Cos ABS ECU £15
YB standard cam belt pulleys, ideal for refurbing / powder coating £10
3* Cosworth Racing 7.2:1 Pistons and rings, with valve cutouts for BD14s, standard bore 90.8mm £100
8* Valve springs, caps and collets £20 the lot
4wd Brake reservoir cover £40 1 only
Larger items
4*4 Cross member £30
4*4 Saph rear left light cluster, including bulbs, some small marks £10
Saph 4*4 Front ARB with Deflex bushes (silver powder coated, scratched) £30
Stainless steel bonnet stay (this is 10mm longer than standard, and will need the hole on the slam panel filing open a little to fit when shut) £10 CAN BE SEEN IN THE ABOVE PIC ^^^^
Cheers
Si
IF NOT LISTED IN WRITING I DON’T HAVE IT ANYMORE SORRY, SOME PICS SHOW SOLD ITEMS NEXT TO ITEMS THAT ARE LEFT
As well as the items below I have a 4x4 Cossie propshaft in the shed, make me an offer!
4x4 Gearbox mount £5
3 * Left hand clear side repeaters with springs. Not cracked. £5 each
Motorcraft coolant cap £4 posted
Pair of Flint Grey electrically heated and adjustable mirrors from my Saph £40
9 * Flywheel bolts £5
4*4 Dizzy cap £5
Saph bonnet vent shield thing £5
Oil pump drive pulley £10 (ONLY THIS ITEM LEFT - it's the pulley on the very left of this pic)
Oil sensor £10
4*4 Through sump driveshaft £20
Ported / flowed / fettled by Cylinder Head Developments Inlet manifold, powder coated silver. Inlet tract no 1 cracked when I hung the inlet on the car with no support for a while, this has since been welded up. £20
New in box Motaquip VCVU800 front inner CV gaiter, 105mm long, 65 & 25mm ends £10 DELIVERED
Delphi Borg & Beck HD5526 Clutch release bearing £20
Cosworth parking sign, brand new £15
ETB Oil temp, Tim oil £5 each RACETECH SOLD
Gear knob, grub screw fitting, left hand side one in the pic only £5 MOMO one on the right has now SOLD
Unused steering wheel boss kit for Mk3 Fiesta Mk5 Escort £20 This may have sold, need to check!
Dizzy caps, 3 * 2wd ones £5 each
2.5 Escort Cossie map sensor, brand new in bag £50 The one in the bag, not the old 3 bar next to it!
Dizzy rotor arms, 1 left £3
Denso Iridium IK31 COSSIE Spark plugs, little use £20
Cossie rocker cover bolt kits, black £2
3 in total x 4*4 Cos Gearbox support cradles (1 comes with a bush) £15 each
Cometic exhaust manifold gaskets, 3000 miles old £5
Cos rear diff hanger, 18 years old I bet, worked fine though £10
4*4 Cos ABS ECU £15
YB standard cam belt pulleys, ideal for refurbing / powder coating £10
3* Cosworth Racing 7.2:1 Pistons and rings, with valve cutouts for BD14s, standard bore 90.8mm £100
8* Valve springs, caps and collets £20 the lot
4wd Brake reservoir cover £40 1 only
Larger items
4*4 Cross member £30
4*4 Saph rear left light cluster, including bulbs, some small marks £10
Saph 4*4 Front ARB with Deflex bushes (silver powder coated, scratched) £30
Stainless steel bonnet stay (this is 10mm longer than standard, and will need the hole on the slam panel filing open a little to fit when shut) £10 CAN BE SEEN IN THE ABOVE PIC ^^^^
Cheers
Si
Last edited by Si B; 11-12-2010 at 08:36 AM. Reason: Post updated December
29-01-2010, 06:25 AM
#2
sib666@hotmail.com
As a gift would be great
PM me your full name and address.
31-01-2010, 07:43 PM
#6
Paypal as a gift please - sib666@hotmail.com
Send me a PM with your full name and delivery address and I'll get it off in the post either Mon or Tues.
Caps are with it. All bores looked fine until I looked closer in no 3. There's a suspect mark. Can't feel or tell if it's a crack, so will have to get a specialist to look at it. Wouldn't feel right sending it to you if it is buggered. Oddly, 6 or 7 years ago when it was in my car, it was running 371 bhp on a T34 .63 absolutely fine
Hmm.I'll try and get it checked this week and let you know what I find out.
Si
31-01-2010, 09:00 PM
#7
Hi Matt,
Caps are with it. All bores looked fine until I looked closer in no 3. There's a suspect mark. Can't feel or tell if it's a crack, so will have to get a specialist to look at it. Wouldn't feel right sending it to you if it is buggered. Oddly, 6 or 7 years ago when it was in my car, it was running 371 bhp on a T34 .63 absolutely fine
Hmm.I'll try and get it checked this week and let you know what I find out.
Si
Cheers Si
If its all good would you be able to take it to central day?
Trending Topics
01-02-2010, 09:15 PM
#9
Got it, thanking you ta! Will be in the post first class to you tomorrow.
Cheers Dan
More positive feedback on it's way to you.
Si
01-02-2010, 09:36 PM
#11
By 4x4, you did mean Evo fitment right? No, oh well, guess I'll keep them on my car then
Fantastic brakes, thoroughly recommend them. Spend the extra and enjoy well proven set up. I'd recommend Carbotech pads in them rather than DS2500 / DS3000 type offerings though.
04-02-2010, 07:14 PM
#14
Good stuff, thanks for the positive feedback
BTTT for the rest of it. I'm off to Canada tomorrow for a week, so will reply if and when I can get online.
Happy to bring stuff to Central Day if it helps, will need payment first to secure the item though.
BTTT for the rest of it. I'm off to Canada tomorrow for a week, so will reply if and when I can get online.
Happy to bring stuff to Central Day if it helps, will need payment first to secure the item though.
05-02-2010, 05:02 PM
#18
Sorry Matt no joy. I don't want to sell it if it is buggered, and the nearest engine machining place now seems to be Bridgewater, 30 miles from me. I work during the day so not been able to get over to the place.
I'll try and sort when I get back if you can wait, but I'm shooting off right now for foreign lands so it would have to be after 15th Feb.
Oi! Car's going with me to the airport, we're staying with friends near by so you'll have to search around the Heathrow area!
Happy Meal? You know how to win him over then
I'll try and sort when I get back if you can wait, but I'm shooting off right now for foreign lands so it would have to be after 15th Feb.
Oi! Car's going with me to the airport, we're staying with friends near by so you'll have to search around the Heathrow area!
05-02-2010, 05:17 PM
#19
Sorry Matt no joy. I don't want to sell it if it is buggered, and the nearest engine machining place now seems to be Bridgewater, 30 miles from me. I work during the day so not been able to get over to the place.
I'll try and sort when I get back if you can wait, but I'm shooting off right now for foreign lands so it would have to be after 15th Feb.
I'll try and sort when I get back if you can wait, but I'm shooting off right now for foreign lands so it would have to be after 15th Feb.
have a goodun
Matt
06-02-2010, 10:44 AM
#22
Advanced PassionFord User
iTrader: (4)
Join Date: Sep 2008
Location: Sutton
Posts: 2,250
Likes: 0
Received 0 Likes
on
0 Posts
Your wish is my command:
By 4x4, you did mean Evo fitment right? No, oh well, guess I'll keep them on my car then
Fantastic brakes, thoroughly recommend them. Spend the extra and enjoy well proven set up. I'd recommend Carbotech pads in them rather than DS2500 / DS3000 type offerings though.
By 4x4, you did mean Evo fitment right? No, oh well, guess I'll keep them on my car then
Fantastic brakes, thoroughly recommend them. Spend the extra and enjoy well proven set up. I'd recommend Carbotech pads in them rather than DS2500 / DS3000 type offerings though.
I will have them for £200 cheers
28-02-2010, 10:08 AM
#25
Couple of piccies of it:
It's normal location
Dead gearbox at Castle Combe while taking an extremely fit girl for a run
Smoked a bit too
, the oil breather kit return pipe had melted and so oil flowed onto the exhaust:
The reason I got an Evo - this one left me for dead while not smoking the place out
5 years of blood sweat and tears, plus a few ££s. Top fun and met some top people. Sadly 20 year old car, lunatic driver and track days on a budget took their toll
One last pic, my best ever lap of Combe in my Cossie - 1 complete lap following Martin in his version 2 Escort when he only ran around 550 bhp, not a huge amount in it
Was right up behind him till that point on the track when a valve decided to snap, drop down the bore of no 4 and chew up my 200 block, heavily modded head and Cosworth Racing piston
Hence this thread. I blame Martin!
02-04-2010, 10:21 PM
#36
sib666@hotmail.com
Send as a gift please, and PM me with your full name and delivery address
03-04-2010, 04:42 PM
#37
Call it £11 and I'll post it out to you. Paypal address:
sib666@hotmail.com
Send as a gift please, and PM me with your full name and delivery address
sib666@hotmail.com
Send as a gift please, and PM me with your full name and delivery address
done..
