Zetec Turbo Project Breaking
 

I've decide to stop my project to buy a saff coz everything is for sale if you want any photos please ask and i will email them or post on this thread for you.
thanks for looking.

Large front mount intercooler (twin pass)3" inlet and outlet comes with silicon 90deg bend 3"- 52mm (new) sold

2.0l zetec block just machined and honed for pistons. inc main caps and crank front breather blocked turbo oil drain and new rear breather pipe fitted sold

4 supertech forged low comp pistons (new) SOLD

4 Eagle H section steel rods(new) SOLD

new main and big end shells(standard size)(new) SOLD

1.8 zetec sump and strainer(used)

silver top cam cover(used)

Black top cam cover(used)

2.0l zetec head with cams(standard 2.0l) tapped and drilled to take erst manifold(used)

Kent cam pullies(not great condition but still will work) blue(used) SOLD

meagsquirt 2 ecu loom and disk set up to run edis4(new) SOLD

edis 4 module and plug and coil pack(used) SOLD

19 row earls oil cooler(used) SOLD

Mocal oil cooler adapor plate with thermostate(new) SOLD

custom made zetec turbo in let with massive 76mm throttle body and rover turbo injectors SOLD

universal adjustable fuel pressure regulator with gauge(used once) SOLD

universal oil breather(new) SOLD

T0E4 turbo with 360 degree thrust bearing with T3 flange good for 45psi (new) SOLD
comes with used oil drain pipe and used braided oil feed pipe

Tial Copy External waste gate(38mm) come with flanges to make your own screamer pipe(new)

Erst exhauste manifold(used) SOLD

Cosworth Pipercross cone filter(used but excellent condition) SOLD

Focus rs clutch(new) SOLD

Zetec 240mm flywheel just be re faced

All my 4x4 stuff to make a car 4x4 using mondeo escort parts inc gear box transfere box rear diff escort diff hanger mondeo diff hanger escort fuel tank and pumps rear drive shafts the important front drivers side drive shaftmondeo prop mondeo rear hubs with spacers to take escort shocks.

I'm also breaking a fiesta turbo all still avalible but no engine, gear box or managment.

I'm sure there is more i will list when i remember.

Please feel free to pm for prices or make me a sensible offer.

I will post anything you want as long as you are willing to pay the postage or you are more than welcome to pick it up or arrange your own couriour..

I'll do my best to answere any qustions you may have,

Thanks for looking,
Phil

How much for the pistons?

would you be intersted in the block and rods as well?

Hi Phil, you wouldn't happen to still have the springs off the 4x4 Mondeo would you? If so, how much?

TIA

i may have the rears i'll have look tomorrow for you and let you know.

mondeo rear beam this has now been stripped of all parts

http://i305.photobucket.com/albums/n...eorearbeam.jpg

Not unless you could do the lot for very cheap :) COME ON!!!! ;)

make me an offer.

PM sent

I'll let the pistons rods and block go £600 +p+p ono

may be interested in the inlet... any chance of emailing me some pics to fiestaxrsi@hotmail.com?

Hi phil,

would you have a supressor for an ofab fiesta turbo loom? If so how much? also do you have any pics of the oil breather and how much do you want for it. pm me if you like.

Cheers
Si

how much you looking for the megasquirt setup mate thanx

i'll let it go for £200 with th edis4 modual and bits.
thanks,
Phil

hi what version megasquirt 2 is this thanx and can you send pics of whats included thanx again mate

it's v.3 comes with ecu loom pc cable and everything for the edis4 set up moduel plug vr sensor and plug coil pack and plug
coil not in pic but IS included.
thanks,
Phil


http://i305.photobucket.com/albums/n...2002/MEGAS.jpg

How much for the clutch? Is it the AP organic or the crap AP one from Ford???

Ap one from ford £60 plus p+p.

how much for the black top rocker cover

pm. sent

Do you still have 19 row earls oil cooler and Mocal oil cooler adapor plate with thermostate for sale if so how much. Plus any pictures.

sorry sold

any twin lights mate

would the sell the 2litre cams on there own mate?

how much for all the 4x4 stuff