When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
just sold last of aftermarket systems I have today, but have full original systems and driveshafts but its collection only on these as a nightmare to wrap let alone ship
Would you sell the gearbox torque mount bolts separately?
need the big one that attaches to the subframe and the smaller one that connects to the bracket on the gearbox
Would you sell the gearbox torque mount bolts separately?
need the big one that attaches to the subframe and the smaller one that connects to the bracket on the gearbox
lower dogbone ones are only cheap del and the upper gearbox ones always tear yet to have a intact ones mate except when I do get vibra technic ones but they go for decent money and sell fast
edit sorry mate thought I read mounts, any bolts I get go into a melting pot of scrap but next one I get in I will grab bolts
just sold last of aftermarket systems I have today, but have full original systems and driveshafts but its collection only on these as a nightmare to wrap let alone ship
Been trying my arse to source decent bits locally but not much luck, the drive to Watford is getting more tempting by the minute! Can you quote up the bits I'm after (separate and whole) please. Manifold (good nick standard but prefer stainless or uprated, cat (or sports cat) and exhaust system. Tar muchly.
Been trying my arse to source decent bits locally but not much luck, the drive to Watford is getting more tempting by the minute! Can you quote up the bits I'm after (separate and whole) please. Manifold (good nick standard but prefer stainless or uprated, cat (or sports cat) and exhaust system. Tar muchly.
good OE manifold Ł40, stainless all sold
cat Ł40 sports cats sold
OE system Ł40
lower dogbone ones are only cheap del and the upper gearbox ones always tear yet to have a intact ones mate except when I do get vibra technic ones but they go for decent money and sell fast
edit sorry mate thought I read mounts, any bolts I get go into a melting pot of scrap but next one I get in I will grab bolts
it's just the torque mount bolts we need Steve, not the mount itself. Bolts are apparently NLA from Ford.
we have vibra technics mounts for the RS but we've lost the bolts while it's all been apart
Hi Steve, got an up to date list of what you have available ?
current breakers are a high spec 5dr in imperial blue and a magnum grey 3dr, plus we have buildings full of parts so its a case of making up a list of parts your looking for
Thanks again for help and engine Steve Managed to get up to Staffs with it (mega long trip due to M6 closure) and back without any dramas Please thank Stu for giving me the extra time to load up, hope his racing went well
Hi Steve, got any of those euro spec reverse lights? I fancy going the twin reverse light route
Plus, the uprated GEMs you have on your lovely car, is it a question of just getting the higher spec GEMs and then setting up the lane flash?
no mate you need the gem unit from high spec mk3 mondeo then plug into forscan to activate a few features as for euro spec light they are on ebay in europe or this link on ebay uk http://www.ebay.co.uk/itm/FORD-FOCUS...53.m1438.l2649
just got one in but need to go through it to see if its ok
Let me know please pal, I only really need the engine itself, not interested in the manifolds, downpipes, gearbox etc (will be used for a basic zetec turbo conversion)
Let me know please pal, I only really need the engine itself, not interested in the manifolds, downpipes, gearbox etc (will be used for a basic zetec turbo conversion)
hg blown on this one
Originally Posted by Fordmad!
Do you have any front calipers and discs to go on my mk6 rs2000. Cheers
have used 170 300mm set ups Ł50+ Ł10 p&p for calipers and carriers
I could still be interested, whats the damage done?
been stood for 3 months and engine filled with sludge and cambelt tensioner goosed, I would not touch it with a barge pole, shame really as car looked good but this is my last 170 as not breaking them after this one anymore
been stood for 3 months and engine filled with sludge and cambelt tensioner goosed, I would not touch it with a barge pole, shame really as car looked good but this is my last 170 as not breaking them after this one anymore
Ah no worries mate...shame youre not breaking them any more...just when I was in search for an engine too lol!
17-08-2017, 11:24 AM
Managed to get up to Staffs with it (mega long trip due to M6 closure) and back without any dramas 
Please thank Stu for giving me the extra time to load up, hope his racing went well 
