Power Test Results?
03-02-2007, 12:47 PM
#1
15000
Thread Starter
Join Date: Nov 2006
Location: London, Totteridge
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Power Test Results?
Hi everyone i bought my Focus RS No. 1432 about 6 months ago and have had the following upgrades done.
Primary Designs Tubular Manifold.
Primary Designs de-cat with WRC exhaust.
Bluefin
Generation 2 K&N Induction Kit.
All fitted by Rob @ SCC (Many Thanks Rob)
My Rolling Road Results are as follows. 257.5 BHP @ 5081 rpm & 298.1Ibft @ 3594 rpm.
Does this sound good or bad with the upgrades a have done.
Next Mods Primary Designs GT28/32 Hybrid Turbo, and a set of custom cams straight from Ian Howell, and im dumping the bluefin for dream science.
Primary Designs Tubular Manifold.
Primary Designs de-cat with WRC exhaust.
Bluefin
Generation 2 K&N Induction Kit.
All fitted by Rob @ SCC (Many Thanks Rob)
My Rolling Road Results are as follows. 257.5 BHP @ 5081 rpm & 298.1Ibft @ 3594 rpm.
Does this sound good or bad with the upgrades a have done.
Next Mods Primary Designs GT28/32 Hybrid Turbo, and a set of custom cams straight from Ian Howell, and im dumping the bluefin for dream science.
03-02-2007, 01:32 PM
#2
BANNED
BANNED
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
Not bad mate, but a lot of people have different results with those modifications. It all depends on the map and the original output of your engine...near no FRS came out with 212bhp as standard...
Mine has the following...
Miltek Exhaust,
Miltek Decat,
Piper 270 cams,
Ford Motorsport Manifold + heat wrap,
Viper Induction Kit,
Bluefin - now done away with a remap,
Denso ITV-22 gapped to 0.7mm,
Magnecor Blue Leads
294.3bhp & 345 lb/ft @ 1.3 bar
Mine has the following...
Miltek Exhaust,
Miltek Decat,
Piper 270 cams,
Ford Motorsport Manifold + heat wrap,
Viper Induction Kit,
Bluefin - now done away with a remap,
Denso ITV-22 gapped to 0.7mm,
Magnecor Blue Leads
294.3bhp & 345 lb/ft @ 1.3 bar
03-02-2007, 07:33 PM
#3
Originally Posted by COCHYN
Not bad mate, but a lot of people have different results with those modifications. It all depends on the map and the original output of your engine...near no FRS came out with 212bhp as standard...
Mine has the following...
Miltek Exhaust,
Miltek Decat,
Piper 270 cams,
Ford Motorsport Manifold + heat wrap,
Viper Induction Kit,
Bluefin - now done away with a remap,
Denso ITV-22 gapped to 0.7mm,
Magnecor Blue Leads
294.3bhp & 345 lb/ft @ 1.3 bar
Mine has the following...
Miltek Exhaust,
Miltek Decat,
Piper 270 cams,
Ford Motorsport Manifold + heat wrap,
Viper Induction Kit,
Bluefin - now done away with a remap,
Denso ITV-22 gapped to 0.7mm,
Magnecor Blue Leads
294.3bhp & 345 lb/ft @ 1.3 bar
bassboy
04-02-2007, 04:46 PM
#4
BANNED
BANNED
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
Yup, standard turbo and its not stressed with too much boost. Just right.
ACT's are fine, no problems at all. But I'm currently making a custom air to air intercooler system. Got an aftermarket intercooler off ebay, and the piping work will be welded by a mate who's a mechanical engineer. Much more thought going into it, as we can now alter the position of the induction kit i.e. towards more air. It will look much better than Pro Alloy's Ł1000 system, and only costs a few quid.....score!
ACT's are fine, no problems at all. But I'm currently making a custom air to air intercooler system. Got an aftermarket intercooler off ebay, and the piping work will be welded by a mate who's a mechanical engineer. Much more thought going into it, as we can now alter the position of the induction kit i.e. towards more air. It will look much better than Pro Alloy's Ł1000 system, and only costs a few quid.....score!
04-02-2007, 04:56 PM
#5
Originally Posted by COCHYN
Not bad mate, but a lot of people have different results with those modifications. It all depends on the map and the original output of your engine...near no FRS came out with 212bhp as standard...
Mine has the following...
Miltek Exhaust,
Miltek Decat,
Piper 270 cams,
Ford Motorsport Manifold + heat wrap,
Viper Induction Kit,
Bluefin - now done away with a remap,
Denso ITV-22 gapped to 0.7mm,
Magnecor Blue Leads
294.3bhp & 345 lb/ft @ 1.3 bar
Mine has the following...
Miltek Exhaust,
Miltek Decat,
Piper 270 cams,
Ford Motorsport Manifold + heat wrap,
Viper Induction Kit,
Bluefin - now done away with a remap,
Denso ITV-22 gapped to 0.7mm,
Magnecor Blue Leads
294.3bhp & 345 lb/ft @ 1.3 bar
how much did that lot cost you mate?
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
