PassionFord - Ford Focus, Escort & RS Forum Discussion

PassionFord - Ford Focus, Escort & RS Forum Discussion (https://passionford.com/forum/index.php)
-   Ford Focus RS Parts for Sale. (https://passionford.com/forum/ford-focus-rs-parts-for-sale-72/)
-   -   Do you want to build a 4x4 RS Mk1 Focus provisionally SOLD (https://passionford.com/forum/ford-focus-rs-parts-for-sale/480288-do-you-want-to-build-a-4x4-rs-mk1-focus-provisionally-sold.html)

IAN RS2k 25-03-2015 12:18 AM

Do you want to build a 4x4 RS Mk1 Focus provisionally SOLD
 
I was building a modified RS2000 4x4 which I now due to health cannot do now, I built up a very high spec I4 2.3 to run in it (which is also for sale) but what would be of interest to RS Focus people is that I had a Mitsubishi EVO 6 gearbox & LSD front transfer box 8000mile on it from new re-machined (NOT an adaptor) to fit Ford bolt pattern the same as on the Focus RS Zetec. I have the gearbox with the transfer box, prop shaft & a EVO RS rear diff which are LSD not the yew control type plus the drive shafts
To break the price down the gearbox, transfer box front shafts (Ford Escort outers) & propshaft £1600
Rear EVO RS diff with front rubber mounts & EVO drive shafts £1300 (these are very sort after)

So £2900 for this & it cost me a lot more than that to have it all done NOW £2500!!!!!!!!! THIS WOULD MAKE ONE HELL OF A RS FOCUS (NOW SOLD)


I also have a new AP racing clutch organic new cost £700 ish sell for £400
http://i374.photobucket.com/albums/o...psf04b8ead.jpg

IAN RS2k 14-04-2015 08:11 PM

Price dropped this would sell for £2500 in bits I have seen the rear RS diffs sell £1700 the transfer box £600 then the box would just need the bell housing side swopped to make a good gearbox then the propshaft & gear stick are all worth money so its a fair price for the Ford conversion

IAN RS2k 16-04-2015 03:14 PM

Update to point out the front diff is also a LSD

IAN RS2k 26-04-2015 02:59 PM

Provisionally sold going to be fitted in a RS Focus

tvicherek 08-12-2016 09:51 AM

Gearbox
 

Originally Posted by IAN RS2k (Post 6584555)
Provisionally sold going to be fitted in a RS Focus

Hallo Ian, please can i ask you for your contact? I woul like to get some info on the 4x4 build you have done. Iv got FRS mk1 that i would like to convert..

Im from Czech Republic , but dont mind callig you for few minutes if you dont mind to share some knowledge ;)

Best regards

Tom


All times are GMT. The time now is 11:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands