3M Di-Noc Carbon Fibre Vinyl Wrap
#1
PassionFord Post Troll
Thread Starter
iTrader: (5)
Join Date: May 2003
Location: Dunstable (Junction 9 or 11 of the M1)
Posts: 3,002
Likes: 0
Received 0 Likes
on
0 Posts
3M Di-Noc Carbon Fibre Vinyl Wrap
We are now selling 3M Di-Noc Carbon Fibre Wrap
Prices:-
3M Di-Noc Carbon Fibre Wrap:
1220mm x 1m = £50.00
Other sizes:-
120cm x 30cm = £17.00
100cm x 60cm = £26.00
120cm x 50cm = £28.00
120cm x 60cm = £30.00
150cm x 122cm = £78.00
200cm x 120cm = £105.00
Other dimensions available - please ask for prices.
Accessories:
Squeegee with Felt Edge = £2.50
Please call 01582 696 111 (10:00am-10:00pm) or PM
Natalie
Rapid-Ford
Prices:-
3M Di-Noc Carbon Fibre Wrap:
1220mm x 1m = £50.00
Other sizes:-
120cm x 30cm = £17.00
100cm x 60cm = £26.00
120cm x 50cm = £28.00
120cm x 60cm = £30.00
150cm x 122cm = £78.00
200cm x 120cm = £105.00
Other dimensions available - please ask for prices.
Accessories:
Squeegee with Felt Edge = £2.50
Please call 01582 696 111 (10:00am-10:00pm) or PM
Natalie
Rapid-Ford
Last edited by Dan@Rapid-Ford; 11-06-2010 at 09:35 PM.
#4
Too many posts.. I need a life!!
Join Date: Dec 2009
Location: benfleet
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
hi mate intrested in the wrap
what sort of quality is it. and how easy is it to apply ?
dont want to sounds like a noob but what does 3M Di-Noc mean ?
what sort of quality is it. and how easy is it to apply ?
dont want to sounds like a noob but what does 3M Di-Noc mean ?
#5
PassionFord Post Troll
Thread Starter
iTrader: (5)
Join Date: May 2003
Location: Dunstable (Junction 9 or 11 of the M1)
Posts: 3,002
Likes: 0
Received 0 Likes
on
0 Posts
3M DI-NOC Carbon Fibre Finish is a vinyl film that looks like the real thing but is less expensive and more versatile than carbon fibre.
It is simple to install and easy-to-clean with a modern, visually appealing design making the carbon fibre finish perfect for unique wrapping of interior or exterior car surfaces such as bonnets, boots, roofs, side view mirrors and interior plastic.
It's not a printed carbon pattern. The film has an embossed finish resembling true carbon fibre, which reflects light as expected and changes the highlights of the pattern depending on the viewing angle.
Key Features
- 3-D graphic contrast, hi-touch embossed finish
- The ultimate in flexibility and conformability to curved surfaces
- 3M™ Comply™ adhesive to ensure a bubble-free installation
- Stretchable with heat
- Can be cleaned with detergent and water
- Has a look & feel similar or better to carbon fibre bonnet and hard-top
- Can be applied on interior and exterior surfaces of a car (hoods, trunks, side view mirrors, interior plastic…)
- Can be applied easily on all the most common car paints
- Cost-effective
#6
Too many posts.. I need a life!!
Join Date: Dec 2009
Location: benfleet
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
cheers for all that info mate thinking of buying alot of the stuff because mates keep asking for somewhere and there is a market for me to do it..
how much would you need to wrap a bonnet
how easy is it to fit. and how does it stick.
also how does the material fit round corners etc say when doing a bonnet where do you cut it or do you jsut wrap around the sides of it ?
how much would you need to wrap a bonnet
how easy is it to fit. and how does it stick.
also how does the material fit round corners etc say when doing a bonnet where do you cut it or do you jsut wrap around the sides of it ?
Last edited by Conor Harrington; 08-06-2010 at 10:13 PM.
#7
PassionFord Post Troll
Thread Starter
iTrader: (5)
Join Date: May 2003
Location: Dunstable (Junction 9 or 11 of the M1)
Posts: 3,002
Likes: 0
Received 0 Likes
on
0 Posts
cheers for all that info mate thinking of buying alot of the stuff because mates keep asking for somewhere and there is a market for me to do it..
how much would you need to wrap a bonnet
how easy is it to fit. and how does it stick.
also how does the material fit round corners etc say when doing a bonnet where do you cut it or do you jsut wrap around the sides of it ?
how much would you need to wrap a bonnet
how easy is it to fit. and how does it stick.
also how does the material fit round corners etc say when doing a bonnet where do you cut it or do you jsut wrap around the sides of it ?
It's not too bad to fit but it does take practice - it's like tint film but it doesn't crease as easily as tint or tear and if you need to move it you can pull it back off in places and re-apply it. If you stretch it too much you can heat it and it will contract back to a flat sheet.
You clean the panel with prep fluid and it sticks like shit to a blanket. You apply it dry (not using soapy water like normal vinyl). To get shapes in the vinyl, you need a hot air gun or a strong hairdryer. You wrap it over the edges of the panels and trim the underside or tuck it under window rubbers depending on what you are doing.
Trending Topics
#8
Too many posts.. I need a life!!
Join Date: Dec 2009
Location: benfleet
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
ok then mate hceers for the reply i have the task to wrap some panels on a motorcross bike as my first client i dont have the complete measuremnts but how much woudl it cost for materials ?
and how do i pay ??
and how do i pay ??
#19
PassionFord Post Troll
Join Date: May 2003
Location: Nr Crewe, Cheshire
Posts: 3,225
Likes: 0
Received 0 Likes
on
0 Posts
i have used apaspa film on my mrs focus ST for her wing mirrors and bonet lip its not bad to use and to be fair i think i wrapped pretty much the hardest thing on the car!
i dont think the 3m stuff is quite as flexible but im sure it will be easy to apply to most surfaces.
i dont think the 3m stuff is quite as flexible but im sure it will be easy to apply to most surfaces.
#20
carbon fibre
if you want to trade on this site you will have to pay the trade fees,also your user name will need to be change as the rules state you cannot use your business name,please PM me with a new user name within 24hr please
regards PF mod team
regards PF mod team
Last edited by Dirty Harry; 27-11-2010 at 02:20 PM.
#34
Resident Camel Stalker
#35
Almost there!
iTrader: (4)
Join Date: Jun 2003
Location: Gatwick (ish)
Posts: 7,434
Likes: 0
Received 0 Likes
on
0 Posts
Dan/Nat, have you found anywhere that you would recommend for fitting this stuff, in ref to larger exterior panels!?
i have no intention of trying it myself, but would like to have it fitted to a panel on the new car.
i have no intention of trying it myself, but would like to have it fitted to a panel on the new car.
#36
PassionFord Post Whore!!
iTrader: (4)
I have used some of this stuff before. It is amazingly easy to apply. Providing the surface is very clean you can have several attempts at it as its very sticky! Also, and bubbles will just squeedgee out
Only thing I will advise against is self control. As it is so easy to apply it can become very addictive.
Only thing I will advise against is self control. As it is so easy to apply it can become very addictive.
Thread
Thread Starter
Forum
Replies
Last Post