orion88

Hey all
Jus wondering on the zvh u have the oil feed from the top of the turbo to tge rear of the block normally a braided pipe however all the zvhs I see have a push on on the block not a thread for the pipe to screw onto
What does every use for this?

muz

All mine have had CVH turbo oil unions drilled and tapped into the oil way. Same place as on a CVH.

orion88

Yea I might have to do that myself tbh

Rogeyboy

iTrader: (2)

Orion88 you're looking at the breather and turbo oil return, they are push fit. The oil feed to the turbo uses a T-Piece from the oil pressure switch, screws straight on!

orion88

Ah makes more sense now so where does the breather pipe go/ come from