put your power where your mouth is,
#42
Skint Passionford User
iTrader: (9)
Mine should be built by then hopefully!!
1600 CVH
Ported head Oversize valves (not sure exactly how big yet though! Not measured them!)
Custom (ish) inlet
Boggo bottom end
FMIC believed to be from a a skyline
Piper BP285T2 Cam
Stage 3 T3 off my old saff
Weber L8 with wasted spark and possibly MSD's ALS for shits and giggles
Scorpio Cossie calipers and 2wd Cos discs and a set of spangly new Konis, all wrapped up and a flexible as fook cabby shell
If I see under 15 i'll be a happy bunny
Then i'll get Crazy to throw it down the 1/4 and see what it can do with someone who knows how to launch
1600 CVH
Ported head Oversize valves (not sure exactly how big yet though! Not measured them!)
Custom (ish) inlet
Boggo bottom end
FMIC believed to be from a a skyline
Piper BP285T2 Cam
Stage 3 T3 off my old saff
Weber L8 with wasted spark and possibly MSD's ALS for shits and giggles
Scorpio Cossie calipers and 2wd Cos discs and a set of spangly new Konis, all wrapped up and a flexible as fook cabby shell
If I see under 15 i'll be a happy bunny
Then i'll get Crazy to throw it down the 1/4 and see what it can do with someone who knows how to launch
#43
PassionFord Post Whore!!
Mine should be built by then hopefully!!
1600 CVH
Ported head Oversize valves (not sure exactly how big yet though! Not measured them!)
Custom (ish) inlet
Boggo bottom end
FMIC believed to be from a a skyline
Piper BP285T2 Cam
Stage 3 T3 off my old saff
Weber L8 with wasted spark and possibly MSD's ALS for shits and giggles
Scorpio Cossie calipers and 2wd Cos discs and a set of spangly new Konis, all wrapped up and a flexible as fook cabby shell
If I see under 15 i'll be a happy bunny
Then i'll get Crazy to throw it down the 1/4 and see what it can do with someone who knows how to launch
1600 CVH
Ported head Oversize valves (not sure exactly how big yet though! Not measured them!)
Custom (ish) inlet
Boggo bottom end
FMIC believed to be from a a skyline
Piper BP285T2 Cam
Stage 3 T3 off my old saff
Weber L8 with wasted spark and possibly MSD's ALS for shits and giggles
Scorpio Cossie calipers and 2wd Cos discs and a set of spangly new Konis, all wrapped up and a flexible as fook cabby shell
If I see under 15 i'll be a happy bunny
Then i'll get Crazy to throw it down the 1/4 and see what it can do with someone who knows how to launch
#46
Wye Valley Hardcore
My spec will be
2.1 ZVH
Accralite pistons running 7.7:1 comp
PEC forged rods
Vulcan big valve p+p head with Focus RS headgasket
XR3 inlet manifold
Newman Phase 4 Cam
Still got no turbo, but more than likely a T34
Tubular exhaust manifold
GRS intercooler.
Cosworth L8 managment and Green injectors
Quaife straight cut gearbox
RS1600i front ARB
MEF TCA's
Should be alright to put some half decent times in.
2.1 ZVH
Accralite pistons running 7.7:1 comp
PEC forged rods
Vulcan big valve p+p head with Focus RS headgasket
XR3 inlet manifold
Newman Phase 4 Cam
Still got no turbo, but more than likely a T34
Tubular exhaust manifold
GRS intercooler.
Cosworth L8 managment and Green injectors
Quaife straight cut gearbox
RS1600i front ARB
MEF TCA's
Should be alright to put some half decent times in.
Last edited by muz; 22-11-2009 at 11:07 AM.
#47
Regular Contributor
mines an overbored 1.8 zvh,
accralite pistons,
t34,
front mount,
gotech pro, jamie (jamsport) mapped,
green top injectors,
15 psi boost,
220horse power
r888's will be on by then
328 nm torque
I am looking for a very early 14 if not i want late 13.
accralite pistons,
t34,
front mount,
gotech pro, jamie (jamsport) mapped,
green top injectors,
15 psi boost,
220horse power
r888's will be on by then
328 nm torque
I am looking for a very early 14 if not i want late 13.
#49
escort mk4 cossy 4x4
Join Date: May 2004
Location: coventry
Posts: 4,629
Likes: 0
Received 0 Likes
on
0 Posts
mk3 fiesta,rallycross carbon/kevlar body kit,wings/doors/bonnet/rear hatch/bumpers.235/40/17 888.250mm extra wide track.hybrid cosworth/focus rs/st 24 suspension.coilovers,4 pot ap 330mm.very low set up,speed bumps are a definate no no.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
#50
mk3 fiesta,rallycross carbon/kevlar body kit,wings/doors/bonnet/rear hatch/bumpers.235/40/17 888.250mm extra wide track.hybrid cosworth/focus rs/st 24 suspension.coilovers,4 pot ap 330mm.very low set up,speed bumps are a definate no no.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
#51
PassionFord Post Whore!!
mk3 fiesta,rallycross carbon/kevlar body kit,wings/doors/bonnet/rear hatch/bumpers.235/40/17 888.250mm extra wide track.hybrid cosworth/focus rs/st 24 suspension.coilovers,4 pot ap 330mm.very low set up,speed bumps are a definate no no.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
Last edited by crazycage; 22-11-2009 at 04:01 PM.
#54
PassionFord Post Whore!!
#55
Regular Contributor
Join Date: May 2005
Location: CENTRAL SCOTLAND
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
i will defo be making effort to come down to a good strip as there isnt any good strips up here,and be good to catch up with some of uze guys and put faces to names,lol.
#57
Advanced PassionFord User
erm mine will be about 130bhp no boost no mtx75 no big build engine as iv ran out of money at the minute so looks like im aiming for new engine to be built for central day 2011 unless i come into some money so i sharnt be going up the strip lol
#58
Regular Contributor
Join Date: May 2005
Location: CENTRAL SCOTLAND
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
#59
..BS Motorsport..
not bringing anything to the table but definately coming down for a look see at this lot! Gonna be either a lot of very happy people or a lot of excuses got the buzz again after seeing two s2's going for it hard last night, sounded awesome. I think mines got ok power but box is shite and theres no way im going through the embarrassment of leaving gearbox oil all over the strip!
#64
PassionFord Post Whore!!
so is anyone interested in a fwd totb team ??? or is that a no go.central day would make a good qualifier and im sure fast ford could get us say 30mins strip time in the day just for the team, the vaux lads do it at pvs .
#65
Wahay!! I've lost my Virginity!!
Join Date: Dec 2007
Location: essex, england
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
fully stripped out series 1, 2.1 zetec turbo 8 injectors tubular exhaust manifolds gt30 450ish bhp have no idea wat times it will run, but if finished will be there
#66
PassionFord Post Whore!!
#68
Advanced PassionFord User
you know id love to mate but engine definatly wont be done in time,but i got to totb and keep thinking it needs a ford team to enter.defo be worth doing mate,perhaps tim and oli might be intrested?
#70
PassionFord Post Whore!!
#71
Advanced PassionFord User
#73
PassionFord Post Whore!!
i thought you would be lol, would be great if they go for for it mate its about time we fords had a proper team .
#74
Advanced PassionFord User
well i best get my finger out then as wouldn't mind a go at totb and to take on a few of you guys at central day seeing as we let luke win last year out of respect
#75
Advanced PassionFord User
Join Date: Aug 2005
Location: dont know anymore!!!!
Posts: 1,761
Likes: 0
Received 0 Likes
on
0 Posts
mk3 fiesta,rallycross carbon/kevlar body kit,wings/doors/bonnet/rear hatch/bumpers.235/40/17 888.250mm extra wide track.hybrid cosworth/focus rs/st 24 suspension.coilovers,4 pot ap 330mm.very low set up,speed bumps are a definate no no.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
10.4 comp st 170 engine,ported cylinder head,225bhp+200 shot of nos.6 speed gearbox,plated diff.
#77
PassionFord Post Troll
i think i'd like a go at this?
a pretty standard engine tho
what would i have to do, bring etc, never done a drag
helen
a pretty standard engine tho
what would i have to do, bring etc, never done a drag
helen
Last edited by RS1HEN; 23-11-2009 at 10:06 PM.
#79
escort mk4 cossy 4x4
Join Date: May 2004
Location: coventry
Posts: 4,629
Likes: 0
Received 0 Likes
on
0 Posts
not sure about totb,we havnt entered a team for years,so we may not get a place,also its sponsored by japanese performance mag now,they might not encourage fords to enter.
at central day it would have to be after the dinner break,to give us time to line peeps up.