Zanderford

right my mate has got a s2 rst the head gasket went a few weeks ago so we changed the head gasket on the way home it got really hot so we stopped checked the oil and water they were both creamy again so we got the head skimmed and did another head gasket flushing the oil and water out both times it ran ok for about a day after that now its misfiring cutting out when pulling up a traffic lights and it idles all over the place we've checked everything is done up tight and checked all plugs are clean and connected does
anyone know what it could be as we're getting a bit bored of taking the head off now

g1234

dont take head off compression test it see if its down on any pots

Zanderford

what do we do after that

notroubleclubber

Has the timing been setup properly after head gasket been done?
Mine was like that and i got a pro to set the timing up and its fine now.

RSTurboSI

iTrader: (1)

they should all read the same when you compression test it.. otherwise it could have done anything, as above, they should be re-timmed with a white laze gun..

jonny s2

iTrader: (12)

Sounds like the timing mate