|
how hard
how hard is it to fit a 2.0 zetec turbo engine in a s2 rst what would i need
|
not very hard and u will need a engine:king:
|
Originally Posted by orion_crazy_carl
(Post 4067299)
not very hard and u will need a engine:king:
|
Originally Posted by grayzo
(Post 4067090)
how hard is it to fit a 2.0 zetec turbo engine in a s2 rst what would i need
|
why i ask on this fuckin forum i dont no
|
you will need a modded drivers side engine mount.oddkidd can supply you with that.the s2 gearbox will bolt up.its very easy engine to fit mate as i done it in a few hours.obviously clutch choice,management,gearbox spec etc etc is another matter but fitting the engine itself is easy
|
Originally Posted by stevenebm
(Post 4068333)
you will need a modded drivers side engine mount.oddkidd can supply you with that.the s2 gearbox will bolt up.its very easy engine to fit mate as i done it in a few hours.obviously clutch choice,management,gearbox spec etc etc is another matter but fitting the engine itself is easy
thanks very much mate |
Originally Posted by grayzo
(Post 4068318)
why i ask on this fuckin forum i dont no
|
Originally Posted by grayzo
(Post 4068318)
why i ask on this fuckin forum i dont no
dont waste ya money buying a modded mount, just lop the end one off your CVH one and will be just as good!:top: |
Orion Carl.
that dont even make sense above? Just do what? LOL grayzo As for a decent list of all the parts needed and what to do and how get on jano's site www.oddkiddcreations.co.uk on there is about 10 people from your way west mids. They will be able to help you out too with labour or help if you need it. i had my ZT built by oddkidd over 5 years ago now, made 300bhp without even trying lol. hth Danny. |
| All times are GMT. The time now is 11:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands