Bakster

I want get better brakes for my rst bur I ca;nt buy wilwood 4 podd from ebay Maybe somebody know what are the best calipers and disc for rs

Wardy257

Some good quality standard discs and pads should be good enough for most RSTs. What do you currently use? What condition are all your brake lines in?

Alex_86

iTrader: (2)

https://passionford.com/forum/viewtopic.php?t=248404

Zetecfiesta

cosworth 4x4 calipers,
cosworth 2wd discs,
some washers and bolts

go to rally design for cheap discs and pads!

addiction

2wd cossie disks
adaptor brackets
standard ERST calipers
ferrodo ds 2000/2500 pads
braided lines
that'll stop a 200 bhp car on its nose

Bakster

Now I have all new brake lines. In front serial calipers and ebc disc with ferrodo pads and goodrige stainles I was thinking about some wilwood 4 master calipers and 285 disc?? what do you think

Bakster

So what do you think about wilwood calipers to serial disc??

Bakster

I have think about this What you think about this calipers and serial disc?? Will be better or not??

http://cgi.ebay.co.uk/WILWOOD-BRAKE-...QQcmdZViewItem

Bakster

So how

CliffRS4

iTrader: (1)

Why bother with the cossie stuff when you can get ST170 stuff from a scrappy and use that with 12mm spacers and slightly bigger bolts.

It pisses all over the cossie conversion.

Trust me

Bakster

And what size will have disc from St170?? where can I buy it all??



Ok I see... Disc are 300mm Cool I like it but where can I get calipers becouse in my country it will be imposible

mentalasanything

Seriously, the link posted by Alex_86 above was to my cossie conversion, and I must say now it's bedded in I am far more than impressed with it! It stops well, and the feeling in the pedal is much stronger not weak ass and slowly going lower and lower. But then perhaps the new lines and the bleeding also helped that!

Highly reccomended.

Also you can run them under standard RST wheels filling them nicely



Lee

Bakster

I think that Cliff S1 have good idea to get st170 all set I have bought today brembo disc for about 60 pounds, and now I must find calipers Maybe somebody can help me with this;( becouse I can find them in Poland

Alex_86

iTrader: (2)

why do u dont go for cossi?

BillyCabrio

iTrader: (1)

But behind what size wheel Dave?

Some of us have a weeeeeener 15"

BillyCabrio

iTrader: (1)

Happens to be what i'm selling

Complete with nearly new Pagid discs and Greenstuff pads.

Oh and the callipers are FULLY reconditioned

**(BTW NOT a for sale post )

NUTS RuS

iTrader: (35)

What size wheels do you have Bakster ??

Bakster

17 ' 7spoken

Bakster

I want st170 becouse the disc are bigger [ cosworth 4x4 calipers,
cosworth 2wd discs] what size have the disc from cossi??

CliffRS4

iTrader: (1)

When I am home at the weekend I will have a butchers on the internet to see if there are any scrap yards with a set of caliper in stock.

Send me a pm on Friday morning and that'll remind me to look around.

749steve

iTrader: (1)

mk3 mondeo or the new focus(mk2) have the same calipers as the st170 and these are ten a penny at scrappys round my way on

Alex_86

iTrader: (2)

hmm

Bakster

The same calipers?? I look in service and they have other number:/

749steve

iTrader: (1)

well my mate is runnig mk3 mondeo calipers and st170 discs on his mk1 mondeo with no probs

Bakster

but witch type mondeo

Bakster

I went to ford today They Tell me that: Calipers in Focus St170 and Mondeo are not the same Disk are the same 300mm but the pads... in mondeo and focus st170 doesn;t be the same... So now I don;t really know how it by to use mondeo calipers and focus disk

CliffRS4

iTrader: (1)

Stop flapping.
I've already said above that I'll have a butchers around at the weekend if you send me a pm on Friday morning

NUTS RuS

iTrader: (35)

Dave - I wonder if the Polish understand "butchers"

Bakster

Cliff ok ok ok I will be waiting for the weekend In polish butchers is a person who kill piggs or something like that

749steve

iTrader: (1)

mk3 mondeo calipers and pads and focus st170 discs
job done

Bakster

Good work m8 well done

maybe disk from focus rs 330mm will be good

Bakster

Ok.... I bought Mondeo 2002 Tdci calipers for 30 pounds now just get 12mm spacers and slightly bigger bolts

CliffRS4

iTrader: (1)

I wonder if the northern monkeys in England understand "Piss Off"

NUTS RuS

iTrader: (35)

@ dave

Just a pic of my disc and bell I sometimes run under my 15's



Think thats a 300 or 305 can't remember lol

Only put them on when Im getting pasted by the competition, otherwise it just uses normal stuff

Being disc and bell its lighter so reduces the un sprung weight

Dont leave them on because it dosnt need it all the time and I like my £14 standard discs because they are cheap