EECIV pin outs anyone?
 

Hi

I've completely removed the Cossie fuebox and wiring and am modifying the wiring loom. Does anyone have a drawing of the small turbo engine management unit and wiring?

cheers
Kenny.

You have PM

ask ryan if in further need of help - the mans is god!

Lets see if Sailorbob can help me out.

any info from Ryan would be appreciated, however I dont know who Ryan is.

Hi Kenny,

I also wouldn't mind any info on the EEC IV... please mail me with anything you find out.... or others that can help.

Thanks in advance..

John

Hi John

I sent an email with an attachment, it shows the pin outs of my EECIV.

Kenny.

sailorbob, red october

who is derek?

How do I contact Ryan?

I want to buy some new pins for my EDIS unit, any ideas.

If possible I would also buy new pins for the 60 pin connector plug.

cheers

Kenny

cheers kenny... i got it thanks. not too much info floating around for the eec iv. I dabble a bit in electronics and want to make myself a device to warn of impending danger to my engine having already melted one. Your info will defo help.

cheers,

john

I usually end up using old pins off spare bits of looms for the 60 pin connector.

old pins
 

Hi

Thats the problem, I dont have any old pins.

I would need to cut and join onto the original wire or pin, thats really messy.

If I knew who made the original connectors, it might be possible to order them?


Kenny.

On an old www.corral.net forum Tyco/AMP was listed as being the supplier. Don't know if this helps.

connector types.
 

Hi

I checked out that site. (they go into codes a bit, don't they)!

Names were Tyco, Delphi, Molex etc. I'll check to see whats available.

'Farnell in one' is a pretty good starting point.

Cheers

Kenny

did i hear my name, thought my ears were burning.

Pins i will have as i deal with tyco\amp ;)

Are these the terminals? if so i have about 3000 of them :cry: :cry: :cry:

http://www.vehicle-wiring-products.c...photo/5962.jpg

pin type
 

Hi Ryan

Those pins are for the plug type used for the Injectors coil packs I think.

The EDIS and the EEC pins are round at the connection end and plated.

I will try to get a photo.

cheers

Kenny.

connector pins
 

See photo of EDIS pins.

I found an address, www.fordfuelinjection.com.

https://i4.photobucket.com/albums/y1...ictures001.jpg

https://i4.photobucket.com/albums/y1...y55/Pin001.jpg

pin outs
 

PM sent.

new connectors
 

possibly available from US are,
EECIV connectors
EDIS connectors
EECIV terminals
EDIS terminals
Crimp tool.

My contact person said delivery 17th Oct, would anybody like some samples to try out?

https://img.photobucket.com/albums/v.../spaghetti.gif
any help?

one colour cable fits all.
 

looks good enough to eat.

Should produce some good boost.



alternative loom!!!
https://i4.photobucket.com/albums/y1...Picture056.jpg

That looks like my orange one which is running 2 looms....EEC4 and 4x4 sierra :cry:

I need pin out for essi cossi 2.0 YB with EEC-IV. Someone ??

D.