Inlet Spacers
 

Anyone on here use one of these, if so what sort of gains did you get??
Was thinking of getting one, but thought I would check them out first. Thanks Neil

Depends on what the rest of your engine spec consists of, and wether it would benefit from having an increased sized plenum!!

fitting this on its own will provide you with an approx gain of 0%

Spec is: 7.2:1 comp with mahle pistons,lightened and balanced bottom end, gas flowed head,greys,hybrid t34,bd10's, rs500 cooler and running 28psi, ect... Just seen these advertised and thought they may be worth a try.
:banana: :top:

UP :clap: