R5COS

i was trying to get the rear anti roll bar bush and link onto the anti roll bar tonight and holy mary mother i could not slip them on, i tryed grease washup liquid spray lube and no joy is there a nack or is it just brut force....

redrsmk5

are these the ones with the small bushes at each end mate? if so great we're both gonna be stuck

THE RADMAN

iTrader: (2)

use a big pair of grips to span the link and the fitting and they pop on easy

mikedaf2

i used a vice and grease to put them on the antiroll bar fitted it to the car then as above i used mole grips grease and somthing to protect the powdercoating.

COS 22

iTrader: (1)

they are twats

like radman says, big grips, remember to put some tape on so u dont damage your paint or powder!!

R5COS

lovely guys thanks ill give it a whirl

RWD_cossie_wil

iTrader: (9)

drop the clamps to make it nice and easy to fit, then just jack the roll bar back up after

Can you get poly bushes for these?

MONSTER

I used a G-clamp

dojj

iTrader: (3)

put a socket on the end of the drop link
use a g clamp to tighten it up
eventually it will pop on