Look at the state of this blown Engine 25+psi stock
Dec 8, 2005 | 09:35 PM
Thread Starter
Joined: May 2004
Posts: 3,313
Likes: 10
From: Cumbria
Look at the state of this blown Engine 25+psi stock
Not mine
a stock KLDE running 25+ psi from here
http://forums.probetalk.com/showthread.php?t=1701176545
Quote:
Originally Posted by PGTRacer
Well I got around to taking apart the busted motor today. I can't imagine all this happened in just a split second
This picture is just a top of the piston everything below the first ring land is gone
This one I still can figure out... the wrist pin some how was pushed out of the rod and shot through the top of the piston. And on cyl #6 the piston was completly shredded in bits of aluminum, the cylinder walls were also cracked.
This is what I found when I took off the oilpan...
whats left of the lower part of the block
How the heck did that get in jamed in there?
That one piston still looks pretty good
Dec 8, 2005 | 09:36 PM
Advanced PassionFord User
Joined: Feb 2005
Posts: 2,193
Likes: 0
From: Manchester... Home of the Reds.
nice
Dec 8, 2005 | 09:37 PM
Joined: May 2003
Posts: 2,767
Likes: 0
From: DERBYSHIRE
surely that can be fixed ..hardly any damage
Dec 8, 2005 | 09:41 PM
Advanced PassionFord User
Joined: Sep 2004
Posts: 1,876
Likes: 0
From: York
Just skim the head and re ring it, it will be like new!!!
Dec 8, 2005 | 09:45 PM
Joined: May 2003
Posts: 8,952
Likes: 55
From: stockton on tees
makes my blow up look like fook all!!
steve
Dec 8, 2005 | 09:45 PM
Joined: Apr 2004
Posts: 3,759
Likes: 0
From: Essex
cant you just hammer them rods straight and glue the pistons back together?
Dec 8, 2005 | 09:46 PM
I've found that life I needed.. It's HERE!!
Joined: May 2004
Posts: 1,487
Likes: 0
From: wolverhampton
now thats how to fuck an engine up.
proper job
Dec 8, 2005 | 09:50 PM
Joined: Oct 2005
Posts: 405
Likes: 0
chocolate rods with too much boost init
Dec 8, 2005 | 10:07 PM
Joined: May 2004
Posts: 4,320
Likes: 0
From: onshore at the moment
Dec 8, 2005 | 10:16 PM
Joined: Sep 2003
Posts: 7,776
Likes: 0
From: UK
BLOODY HELL MATE! dont it proper then. Looks like a mini explosion.
Dec 8, 2005 | 10:19 PM
Joined: Sep 2004
Posts: 4,242
Likes: 6
From: Hartlepool
bet that sounded nice when it let go!
Dec 8, 2005 | 10:42 PM
Joined: May 2003
Posts: 23,682
Likes: 9
From: Ipswich, Suffolk
Looks like it fit for one place.............
Dec 8, 2005 | 10:44 PM
Joined: Mar 2005
Posts: 10,852
Likes: 0
From: Bridgnorth
fuck me!
Dec 8, 2005 | 10:47 PM
Advanced PassionFord User
Joined: Jul 2005
Posts: 1,637
Likes: 0
From: stufFORDshire
bending the rods to low comp it,
Dec 8, 2005 | 10:51 PM
Joined: Dec 2005
Posts: 286
Likes: 0
From: wisbech
Dam right Smit!
Dec 8, 2005 | 10:55 PM
Advanced PassionFord User
Joined: Sep 2005
Posts: 2,409
Likes: 1
From: Walsall
if ya gonna go,go in style
Dec 8, 2005 | 11:09 PM
Joined: Oct 2004
Posts: 9,553
Likes: 0
From: Redditch, Worcestershire
Dec 8, 2005 | 11:20 PM
Advanced PassionFord User
Joined: Sep 2005
Posts: 2,234
Likes: 0
From: whitburn,scotland!!!!
nice,can u not just bend the bits bk in 2 shape and superglue it bk together!lol
Dec 8, 2005 | 11:21 PM
Joined: Oct 2005
Posts: 168
Likes: 0
From: Scotland
Thats a belter......... Thats how you fuck an engine.... Good and proper.....
Dec 8, 2005 | 11:22 PM
Joined: May 2004
Posts: 4,976
Likes: 0
From: Near Ipswich.
OOOOO Ya Basitid!!
Dec 9, 2005 | 06:35 AM
Joined: Apr 2005
Posts: 22,368
Likes: 32
From: Somerset
Not seen one that bad before
Steve.
Dec 9, 2005 | 07:06 AM
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
Quality Carnage.
Dec 9, 2005 | 07:54 AM
Joined: Aug 2004
Posts: 12,518
Likes: 0
From: EsSEX ;)
holy fuck
Dec 9, 2005 | 08:26 AM
Joined: Apr 2004
Posts: 10,863
Likes: 12
From: .
well done that man
Dec 9, 2005 | 08:33 AM
Joined: Dec 2005
Posts: 403
Likes: 0
From: Live in Wigan - Work in Preston
foooooooooook me thats crazy!
Dec 9, 2005 | 08:44 AM
Joined: Aug 2003
Posts: 17,169
Likes: 3
From: Surrey
Damn
Dec 9, 2005 | 09:00 AM
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,436
Likes: 6
From: S.Wales
auch, very nasty. u could clean the block up, stick a glass top on it and use as a coffee table
Dec 9, 2005 | 09:05 AM
Joined: Apr 2004
Posts: 20,134
Likes: 106
From: Wiltshire
well, im no expert but, id say thats fukked
Dec 9, 2005 | 09:13 AM
Joined: Sep 2003
Posts: 6,274
Likes: 28
From: Romford Essex
Nah that will go again
Dec 9, 2005 | 10:20 AM
Thread Starter
Joined: May 2004
Posts: 3,313
Likes: 10
From: Cumbria
Wonder how many times he said fook when it happened
Dec 9, 2005 | 10:40 AM
Joined: May 2004
Posts: 2,626
Likes: 0
From: Guernsey
Dec 9, 2005 | 11:02 AM
Joined: Mar 2005
Posts: 338
Likes: 0
From: SHEFFIELD
Proper job,
what is a KLDE out of?
Dec 9, 2005 | 11:10 AM
Dec 9, 2005 | 11:22 AM
Joined: May 2004
Posts: 4,657
Likes: 0
From: Oldham + Fast Ford
ouch! looks like the sorta thing my overwieght right foot would do
Dec 9, 2005 | 11:23 AM
I've found that life I needed.. It's HERE!!
Joined: Mar 2005
Posts: 1,489
Likes: 0
From: Farnborough, Hants
If your gonna do it, might aswell do it properly
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CossieRich
General Car Related Discussion.
30
Sep 8, 2015 10:08 PM
gjh
Pictures, video & Photoshop Forum
0
Aug 24, 2015 04:38 PM
JoeyBoyden
General Car Related Discussion.
20
Aug 22, 2015 03:23 PM
Sultzi
Restorations, Rebuilds & Projects.
12
Aug 16, 2015 01:08 PM
Look at the state of this blown Engine 25+psi stock
