Cheap 3 door anyone? **SOLD**
Thread Starter
15K+ Super Poster!!
Joined: May 2003
Posts: 16,053
Likes: 1
From: Milton Keynes,Bucks
Cheap 3 door anyone? **SOLD**
My black 3 door for sale as i can't be arsed to break it and i am keeping my engine!
If you have a ropey saff then all the parts needed will fit from that so no exspensive 3 door only bits needed!!
Details are as follows:-
1987/D 3 door RS Cosworth
m.o.t until 2006
Very straight and very solid but does have a couple of minor bits that need painting if your a bufty! The bodykit for instance has a few cracks in the paint around a couple of arches and there is a small car park dent in the passenger door and another small one in the wing just near the headlight. The bonnet has bonnet pins but i do have another black bonnet i can fit if you like.Other than that the body is sound.
Please not it no longer has the RS500 rear fins as these have been replaced with a standard 3 door rear fin! The splitter is still on the front bumper but is a fiberglass rep.
Interior is currently out as i was going to cage it but i can put it back if required? The trim although not mint is tidy and presentable.
It is polly bushed throughout and has Koni front adjustables with AVO adjustables to the rear.
Below are a few pics of the exterior both as it was with various different wheels on and as it is now.
The parts required to get it back on the road are as follows:-
Engine
Gearbox
Engine loom + ecu
Rad+fans
map sensor
front brakes
exhaust
parcel shelf
wheels
I think thats about it as everything else is there and all the parts except the parcel shelf are the same as any 2wd saff!
I can even fit it back-up for you and get it back on the road with your parts for a fee
Price for the car as is £3250 no messers please!
I need this out of the way asap so i can get on with my next project so if it doesn't go off here within the next 7 days i will Ebay it and it will go to the highest bidder!!!
Any questions call me on 07718 901737 or PM but calling would be easier!
Cheers Spadge...
Pic taken a couple of weeks ago with the BBS's on
Pic taken a couple of months ago with the 18" MO's on
Pic taken when i 1st got it
These pics are as it is now
Dent in wing!
Dent in door!
If you have a ropey saff then all the parts needed will fit from that so no exspensive 3 door only bits needed!!
Details are as follows:-
1987/D 3 door RS Cosworth
m.o.t until 2006
Very straight and very solid but does have a couple of minor bits that need painting if your a bufty! The bodykit for instance has a few cracks in the paint around a couple of arches and there is a small car park dent in the passenger door and another small one in the wing just near the headlight. The bonnet has bonnet pins but i do have another black bonnet i can fit if you like.Other than that the body is sound.
Please not it no longer has the RS500 rear fins as these have been replaced with a standard 3 door rear fin! The splitter is still on the front bumper but is a fiberglass rep.
Interior is currently out as i was going to cage it but i can put it back if required? The trim although not mint is tidy and presentable.
It is polly bushed throughout and has Koni front adjustables with AVO adjustables to the rear.
Below are a few pics of the exterior both as it was with various different wheels on and as it is now.
The parts required to get it back on the road are as follows:-
Engine
Gearbox
Engine loom + ecu
Rad+fans
map sensor
front brakes
exhaust
parcel shelf
wheels
I think thats about it as everything else is there and all the parts except the parcel shelf are the same as any 2wd saff!
I can even fit it back-up for you and get it back on the road with your parts for a fee
Price for the car as is £3250 no messers please!
I need this out of the way asap so i can get on with my next project so if it doesn't go off here within the next 7 days i will Ebay it and it will go to the highest bidder!!!
Any questions call me on 07718 901737 or PM but calling would be easier!
Cheers Spadge...
Pic taken a couple of weeks ago with the BBS's on
Pic taken a couple of months ago with the 18" MO's on
Pic taken when i 1st got it
These pics are as it is now
Dent in wing!
Dent in door!
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford Focus RS Parts for Sale.
5
Mar 9, 2016 01:03 PM
Focosmitch
Ford RS Cosworth Parts for Sale
5
Nov 3, 2015 04:08 PM