Focus ST - New member
Thread Starter
Boosting around the NE
iTrader: (1)
Joined: Apr 2010
Posts: 678
Likes: 0
From: County Durham
Well am new to this forum but been on most of the other focus related forums for a while
Am 21 and had a few Fords already -1974 Mk1 escort 1300XL, Mk6 escort, Focus mk1.5 that had quite abit spent on it. Also had 2 Volvos, a Rover, a Nova and an Audi
Bought this Focus ST standard bar the 19" wheels and the grill badge back in October 2009


Get bored very quickly so have changed a few parts to improve it
This was pictured back in February and the small numberplate will return once a new one has been made



This is it at the minute;



Spec;
Dreamscience decat back
Dreamscience Mod C map
Dreamscience induction kit with larger air filter instead of K&N
RS spark plugs
Airtec gen 3 intercooler
Approx 285-300bhp and torue is around 350Ib/ft R/R coming soon
Eibach springs
Pro race 1.2 alloys and Parada Spec 2 tyres
All exterior plastics satin black
Custom ST badging
Lower grill opened up further
Debadged rear
Few more bits but not racking brains enough
Next up is 310bhp thanks to a downpipe, air to oil cooler and removing the centre box from the exhaust. Also a Quaife Diff & RS clutch kit will be getting fitted soon as clutch starting to go. Once this is done a GT30 turbo will be finding its way under the bonnet.
Rob
Am 21 and had a few Fords already -1974 Mk1 escort 1300XL, Mk6 escort, Focus mk1.5 that had quite abit spent on it. Also had 2 Volvos, a Rover, a Nova and an Audi
Bought this Focus ST standard bar the 19" wheels and the grill badge back in October 2009


Get bored very quickly so have changed a few parts to improve it
This was pictured back in February and the small numberplate will return once a new one has been made



This is it at the minute;



Spec;
Dreamscience decat back
Dreamscience Mod C map
Dreamscience induction kit with larger air filter instead of K&N
RS spark plugs
Airtec gen 3 intercooler
Approx 285-300bhp and torue is around 350Ib/ft R/R coming soon
Eibach springs
Pro race 1.2 alloys and Parada Spec 2 tyres
All exterior plastics satin black
Custom ST badging
Lower grill opened up further
Debadged rear
Few more bits but not racking brains enough
Next up is 310bhp thanks to a downpipe, air to oil cooler and removing the centre box from the exhaust. Also a Quaife Diff & RS clutch kit will be getting fitted soon as clutch starting to go. Once this is done a GT30 turbo will be finding its way under the bonnet.
Rob
Trending Topics
Thread Starter
Boosting around the NE
iTrader: (1)
Joined: Apr 2010
Posts: 678
Likes: 0
From: County Durham
It rode horribly on the 19" alloys tbh - that was my main reason for getting rid of them - rides smoother and handles superbly on the pro race alloys
They were 8.5 or 9" in width but could only get 235 section tyres on so were slightly stretched and that didnt help
Rob
They were 8.5 or 9" in width but could only get 235 section tyres on so were slightly stretched and that didnt help
Rob
Thread
Thread Starter
Forum
Replies
Last Post
Cos500
General Car Related Discussion.
3
Sep 16, 2015 09:50 PM




Really starting to like these just recently









