Urgent!!!!!! Focus amp power cable
PLease help, i am trying to wire in an amp into a mk 1 focus, but am struggling to find a suitable place to route the power cable through the bulk head! Any advise would be greatly received.
Borg Warner EFR Equipped!
Joined: Apr 2005
Posts: 5,810
Likes: 2
From: In the unit, building a 450bhp Time Attack Focus!
At worst mate - and i'm not saying this is the ideal solution - but i've seen a few people feed the cable through the gap at the top of the wing
You'll have to pay £20 to get tech info from ffoc now.
Here's my Focus bulkhead:

Looking at the photo, top left hole has a multipin connector through it and the fuse box is behind the glovebox in front of that connector.
There's enough room to drill a new hole but WATCH OUT FOR THE CABLES when drilling.
The other way is top right where the ECU wiring comes through, its a big grommet but is the wrong side for the battery.
.Top centre hole has a/c pipes through and is behind the heater.
Centre left is heater, centre right is steering.
.
Here's my Focus bulkhead:

Looking at the photo, top left hole has a multipin connector through it and the fuse box is behind the glovebox in front of that connector.
There's enough room to drill a new hole but WATCH OUT FOR THE CABLES when drilling.
The other way is top right where the ECU wiring comes through, its a big grommet but is the wrong side for the battery.
.Top centre hole has a/c pipes through and is behind the heater.
Centre left is heater, centre right is steering.
.
Thread
Thread Starter
Forum
Replies
Last Post
JK12
Pictures, video & Photoshop Forum
33
Apr 26, 2021 12:09 PM







