FAO> Big Spec MK3 Escort Owners!
Thread Starter
Ask me a question!
iTrader: (1)
Joined: Sep 2003
Posts: 6,274
Likes: 28
From: Romford Essex
FAO> Big Spec MK3 Escort Owners!
If you have a Mk3 Escort with a decent spec engine bay.
Lookski here:-
http://darkmyst.game-host.org/forum/...4c2b3233126543
Places are going fast with not alot of time left b4 the day!!
Please contact us for more info.
Regards
Lookski here:-
http://darkmyst.game-host.org/forum/...4c2b3233126543
Places are going fast with not alot of time left b4 the day!!
Please contact us for more info.
Regards
Thread Starter
Ask me a question!
iTrader: (1)
Joined: Sep 2003
Posts: 6,274
Likes: 28
From: Romford Essex
Originally Posted by The Usual Suspect
hows the mtx conversions going mate? what clutch do you use dude? 
The clutch depends on what type of use its for, as the cost for one which can take upto around 320bhp is Ł135 for the clutch plate. Then Ł90 for the pressure plate and release bearing. (Comes with clutch plate but not used as replaced for an AP type)
However the above clutch setup was not enough for ZT16v above 320bhp & 380lbft and slipped which is where the next step up comes into play which is made by Helix.
The cost is Ł294 for a full kit.
I think most peeps have understood now that its the way forward
Trending Topics
Guest
Posts: n/a
Originally Posted by Jano_OddKidd
Originally Posted by The Usual Suspect
hows the mtx conversions going mate? what clutch do you use dude? The clutch depends on what type of use its for, as the cost for one which can take upto around 320bhp is Ł135 for the clutch plate. Then Ł90 for the pressure plate and release bearing. (Comes with clutch plate but not used as replaced for an AP type)
However the above clutch setup was not enough for ZT16v above 320bhp & 380lbft and slipped which is where the next step up comes into play which is made by Helix.
The cost is Ł294 for a full kit.
I think most peeps have understood now that its the way forward
10K+ Poster!!
iTrader: (1)
Joined: Jun 2003
Posts: 13,450
Likes: 2
From: Dartford, Kent - Home of the two way one way system.
Originally Posted by AndyP
Originally Posted by BillyCabrio
I'm going 
To pose
To pose
Is the cabbie getting set up, or you going with someone else mate?
Going to get set-up in the next week or so
10K+ Poster!!
iTrader: (1)
Joined: Jun 2003
Posts: 13,450
Likes: 2
From: Dartford, Kent - Home of the two way one way system.
I've copy and pasted for you.............
And yesterday........
Neil comes on here under the user name pornstar or use his email in the first quote.
Its going to be a goooooooooooooooooood day!!
Originally Posted by NEIL@FASTFORD
As title i am now organising a Mk3 thrash at brunters! the more wild the spec the better.
i want peeps to show there interrest and if you can put a quick spec of your car up for me even better. i have a feeling this will be an OddKidd dominated event! 8) 8) 8)
It will be a good crack, ill be sorting it all out, the only drawback is there will be NO spectators unfortunalty and drivers are allowed only ONE passenger!
anybody needs me email- neil.davies@futurnet.co.uk
Thanks
Neil
i want peeps to show there interrest and if you can put a quick spec of your car up for me even better. i have a feeling this will be an OddKidd dominated event! 8) 8) 8)
It will be a good crack, ill be sorting it all out, the only drawback is there will be NO spectators unfortunalty and drivers are allowed only ONE passenger!
anybody needs me email- neil.davies@futurnet.co.uk
Thanks
Neil
Originally Posted by NEIL@FASTFORD
Right people! IT'S ON!!!
Brunters, timing gear and pro snapper are booked for the
WEDNESDAY 31ST MAY....couldnt get in any sooner unfortunatley but it gives peeps a few more days to pull thier fingers out!
im gonna start a list on this thread for CONFIRMED people, if you havnt spoken to me on the phone you aint confirmed so get in touch if you want it!
if you are coming you are allowed ONE passenger per car
and ther will be NO spectators im afraid peeps.
Any questions just ask!
List of confirmed-
Jano- S1 and XR 8)
Aaron (Black Series 1)- S1
Rye- RS1600i
Lee- RS1600i
Liam (S1liam)- S1
Lee- S1
Andy- S1
Benno- S1
Paul (Billycabrio)- XR Cabby
Brunters, timing gear and pro snapper are booked for the
WEDNESDAY 31ST MAY....couldnt get in any sooner unfortunatley but it gives peeps a few more days to pull thier fingers out!
im gonna start a list on this thread for CONFIRMED people, if you havnt spoken to me on the phone you aint confirmed so get in touch if you want it!
if you are coming you are allowed ONE passenger per car
and ther will be NO spectators im afraid peeps.
Any questions just ask!
List of confirmed-
Jano- S1 and XR 8)
Aaron (Black Series 1)- S1
Rye- RS1600i
Lee- RS1600i
Liam (S1liam)- S1
Lee- S1
Andy- S1
Benno- S1
Paul (Billycabrio)- XR Cabby
Its going to be a goooooooooooooooooood day!!
Rules me out then 
15K+ Super Poster!!
iTrader: (35)
Joined: May 2003
Posts: 15,109
Likes: 0
From: Vimto Land Nr Warrington, Cheshire
No thanks Paul. I can think of 1000's of other things & places I'd rather do or go to before attending anything like that.
I don't buy mags so have absolutly no interest in being in one
There are enough Pikeys in this world as it is without advertising everything you have to more of them....
I don't buy mags so have absolutly no interest in being in one
There are enough Pikeys in this world as it is without advertising everything you have to more of them....
Thread Starter
Ask me a question!
iTrader: (1)
Joined: Sep 2003
Posts: 6,274
Likes: 28
From: Romford Essex
Originally Posted by NUTS RuS
There are enough Pikeys in this world as it is without advertising everything you have to more of them....
Back to topic.
Should be a great day to be able to test out some cars which are not road legal, as well as the ones that are.
Thread Starter
Ask me a question!
iTrader: (1)
Joined: Sep 2003
Posts: 6,274
Likes: 28
From: Romford Essex
Originally Posted by BillyCabrio
Jano_OddKidd
That cabbie you've picked up, mk3 or mk4?
That cabbie you've picked up, mk3 or mk4?
Why you scared
Only playing mate, its a mk5 so hold on to your horses.
See ya at the thrash if not b4
I've found that life I needed.. It's HERE!!
Joined: May 2004
Posts: 1,206
Likes: 0
From: middlesex
Originally Posted by BillyCabrio
Well pull ya finger out then!
You've still got 2 and a half weeks yet
You've still got 2 and a half weeks yet
Audio specialist
Joined: Jan 2005
Posts: 2,633
Likes: 1
From: daventry,northants
Originally Posted by Jano_OddKidd
T28 roller bearing, full boost@2200rpm(13psi), 181bhp,194ftlb@ 4100rpm(JEMS block,stg 3 head)
Thats as standard as mine is
Thats as standard as mine is