B.ransley

I have a rs 1800 xr2i and have a cvh mfi turbo engine would like to make a efi cvh engine to put into the fiesta anyone know where to start I.e loom and weather the inlet manifold off the zetec engine will fit the cvh engine many thanks am new to all this so as simple as possible would be great full 😎

studabear

Build a Zetec turbo 16v turbo?

B.ransley

Looks live a lot of work involved and I have a cvh mfi there ?

B.ransley

Was wondering if I could put the two together to make a engine

Adder

Depends on your budget I think. i might be tempted to fit the RS turbo manifold to the Zetec head, sort the oil return, intercooler and breathers and just run it on acouple pounds of boost. I would also put a modern management on it. I think whatever you do I would'nt bother with the MFI

Adder

B.ransley

What bhp would you be looking at like that and I have 2,000 ruthly to play with just seems no 1 willing to help

Adder

I dont really no tbh, I guess your off to a good start with it being the RS 1800 130 bhp ? If you could squeeze 130/140 road wheel horse power that would be good. I think im right in saying that you can get the Forged pistons from the VW turbos to fit if you wanted more boost but this i think is where the aftermarket management would probably be needed. I personaly would'nt be bothered about running over 200 brake on the old BC gearbox tho.

hope this helps

Adder

B.ransley

I also have a lsd 1600 gear box and it's the wireing I'm stuck with the most