martin24uk

Ok long story short

My younger brother bought a fiesta xr2i that some1 had tryed to convert to
a fiesta turbo (ofab) using a fiesta turbo loom and a 1.8zvh

anyway the problem we are having is
1 there are no ignition lights on the dash
2 no power going to the fuel pump
3 not getting a spark

i have been checking the obvious but dont know much about these
as dealt with escorts all my days

it is getting a small voltage to the coil.

where do we start any help on this would be GREAT Thanks

mk1trb

check the green power relay on the back of the fuse box and all the termials from the turbo loom are connected to the batt and all earths are connected.

HirenRS

i reckon u aint conneted the 6 pin multiplug on the firwall behind the edis 4 whre the engne looom connects to the car or u may have shorted a wire going to pr from the ingnition barrel

logitech

hi does anyone know wat edis module i need for a fiesta rs turbo the one i got strts with part number 89