Mint Rst escort Van PROJECT.
 

Well after years of ownership and graft i have made up my mind, its going!
Have lost interest over the last few years which is a shame as it wouldnt take much to complete.

The van was originally a 1.8d, converted by myself and brother around 7 years ago, it is currently SORN and now stands as a 1.6 petrol on the log book.
Got a little bit of history with it, a few mots etc. It is registered 1990 on a H.

It underwent a full restoration in 2007 including, new rear arches, new front panel new side doors and a new rear door.
It has been sprayed in Vauxhall vivaro white (10L) which is quite close to the ford frozen white.
Door shuts, engine bay, under arches and all of the inside also painted.
The work carried out was done to a very high standard and pictures really dont do the paint work justice. Arches Undersealed.
Restoration cost in excess of £2000;-)

Interior:

Escos Leater seats
Flocked dash and various interior components
Bespoke Merc black leather roof lining
Part leather door cards
Momo steering wheel
Ford racing gauges
Clifford concept 300 alarm

Exterior:

Full Respray
delocked drivers door
delocked and de handled rear door
5x 17" ford focus mp3 alloys powdercoated black ( 1 diamond cut) Mint!
new indicators side repeators
Slightly tinted rear lights
Colour coded rear bumpers
flushed bonnet, bumper
Metal door handles (could do with a repaint)
Brand new top tint windscreen.

Engine, suspension, transmission:

1.6 CVH turbo standard bottom end
Piper 285t2 cam
Grp a head gasket
Stage 2 turbo?:roll:
Mocal oil cooler
Header tank and swirl pots
Scorpion exhaust
New battery
New water pump
New alternator
New cam belt
Boost, water and ancillary samcos
Strut brace

Was going to convert to EFI therefore there is a series 1 inlet on it. will include original inlet as well
Everything been painted or powder coated
Various polished/chrome parts.

Brand new Koni shocks, lowered springs up front.
De cambered rear springs with new bushes, brackets and mounts. Brand new ford rear shocks. all powder coated new cv's and tca's. powder coated anti roll bar.

1.8D gearbox with black diamond clutch
Powder coated drive shafts.


This van is finished to a very high standard and needs very little to complete. Various spares included.

* There are a few bad points: front panel could do with prepping and painting as the paint has reacted slightly.

* A few silicone dots on slam panel.

Viewing is highly recommended anyone questions please ask.
I have spent £££££'s on this van so not going to give it away.

It really would be a shame to break it at such a close stage to completion but if i dont get much interest i will.

£2500 ono:shocked:

These are about the best pics i have although theres a few changes, radiator, brakes and numberplate are not included.



http://i477.photobucket.com/albums/r...1022010125.jpg

http://i477.photobucket.com/albums/r...5032009008.jpg

http://i477.photobucket.com/albums/r...9032009007.jpg


http://i477.photobucket.com/albums/r...32009469-1.jpg

http://i477.photobucket.com/albums/r...5-1587_IMG.jpg

http://i477.photobucket.com/albums/r...5-1569_IMG.jpg

http://i477.photobucket.com/albums/r...5032009009.jpg

http://i477.photobucket.com/albums/r...1588_IMG-1.jpg

http://i477.photobucket.com/albums/r...5-1567_IMG.jpg

http://i477.photobucket.com/albums/r...5-1586_IMG.jpg

http://i477.photobucket.com/albums/r...5-1568_IMG.jpg




http://i477.photobucket.com/albums/r...5-1584_IMG.jpg

oh dude you know what i think of your project,STUNNING BARGAIN good luck with the sale

Thanks mate:king:

so what do u think it needs to finish?and whereabouts in the uk r u?

great van that mate
credit to ya
paint looks great
wish i had my licence back

i will keep an eye on this but dont think it will hang about long

Well as i intended to convert it to efi, i sold the ecu's etc. so to put it back to mfi it would need

Both ecu's
metering unit
fuel filter
radiator
Intercooler

But obviously efi would be the better option and prices on that vary.

Would also need a bonnet catch for the front pannel and bonnet
and a front brake set up.;-)

Cheers mate;-)

Looks stunning mate :top:

Thanks mate..Yours looks spot on too:clap:

Very nice, good price too.:king:

Cheers mate:grin:

looks well mate....

if you do break it im interested in the shell minus wheels,engine box,interior

if only i had a bit more money, can u pm the lowest price.

BUMP

Im open to offers!!:king:

where in the uk are u?

BUMP...Still here guys added a few bits so a little nearer to completion.

S2 mani installed, ecus, metering head also on now, sourced a standard intercooler and fan.

Needed: Front brakes
Rad
Fuel accumulator and Filter
Spark plugs