james kiely

iTrader: (5)

refurbed in anthracite and never fitted rare comp th 8x16 et 28

only the wheel shown has sticker fitted
********sold*********

james kiely

iTrader: (5)

new pics added

Caddyshack

Are these group A fitment? / require different bolts or nuts? Also do you think there is enough meat on the back to skim off say 2mm and make them ET30? (I think my head is working right and not making them ET26?)

james kiely

iTrader: (5)

Yes toby you will need the grpa bolt with the sleeve.not expensive. I'm not sure what meat is on them till I get home and check mate.yeah 2mm off will give you et 30

Caddyshack

Cool, please do let me know

james kiely

iTrader: (5)

toby their is about 20mm from the back face to the front face of the rim .i couldnt see removing 2mm being an issue ,but im no expert mate

Caddyshack

Thanks for doing the pic. I will speak to Mark at MK as I think he has the tools to do this and the know how to tell me if it is sensible and safe. I will report back

Thanks

james kiely

iTrader: (5)

No problem toby

jonfoc

I reckon you'll be fine Toby.

Caddyshack

I am a bit nervous as I have 8x16 et 25 and they poke out a bit too much on the car but my 7x16 et 25 look fine but a little too skinny for the power it will eventually make so would like a bit more foot print, I need to sell the et25 ones and worried I will end up with another set of wheels I do not have a use for an may devalue them if machined...plus the cost of couriers and having the work done.

I have left a message for Mark Walker to see if he can machine them, at least I could ship direct to him.

Caddyshack

Mark says anything up to 6mm. Is ok mind he has the machine to do it. I will pm you

james kiely

iTrader: (5)

no probs toby

Caddyshack

Wheels arrived today in as described condition, well packaged and in the time scale expected with excellent communications. Man Thanks


I just need to locate some group A bolts and inserts now but have emailed a chap

james kiely

iTrader: (5)

cool thanks toby

fatboy billy

James is a top bloke to deal with!

As for nuts and studs I used steve at speedshack mega helpful and knowledgeable

Lovely wheels too