More progress today, got the engine, box, starter etc all bolted in correctly and tightened up. Then cracked on with putting the Si loom on and the ECU in. Got in the car to start it up and it was really struggling, wouldn't start well and wouldn't idle at all. We were fiddling round swapping coilpacks/leads etc for about 20 minutes because it was running on 3 then 2 cylinders. Then we had a look on Autodata and found the injectors were in the wrong order! Got them in the right order and it started first time and runs a treat! We do have a few spare bolts though.....maybe from the escort engine mounts and several bolts on top of the engine that came with it when we bought it. Plus a bracket, can't for the life of us remember where this bracket sits so will get a picture tomorrow see if anyone can help. It's not on the road yet and won't be going anywhere till the bracket it on. Plus it's very smokey, one of the spring bolts snapped taking it off so we can't get the exhaust to seal properly but I have a few spares
http://vid938.photobucket.com/albums...pstbysehek.mp4