Originally Posted by
luke_rs1800
right im going to be making up / getting made up some braided pipes. but i need to know what internal diameter pipe to use for what...
1st off from brake and clutch reservoirs to master cylinders on the pedal box. then from the master cylinders to the bulkhead connections to copper brake lines etc.
2nd from clutch master cylinder to salve cylinder at the gearbox.
any advice would be great. thanks.
luke
I used torques for some of mine and had the brake lines made by these people
http://furoreproducts.co.uk/brake-ho...up-to-04m.html
I think you need swaged ends for MOT not the compression fittings.
-3 for pressure lines
-4 for non pressure
Not sure of dimensions I/d etc. but sure you could find out