thanks for the info martin
been trying to set the tps,when i set the closed position to around 0.35v,the car idles perfect,when you rev it,the amal valve remains OFF,(not energised).
When i set the tps to say:- .8 volts,at idle,i get a higher voltage reading fully open.around 5v.The car idles at about 2500rpm,but then when i rev it,the amal valve energises.
Its as if i cant get full open movement of the tps when i set it to .35 volts,

Do you know of a link ,where i can look at a wiring diagram with the colours on
Cheers
Matt