Old Jan 27, 2013 | 08:25 PM
  #3  
matthewpickup's Avatar
matthewpickup
I've found that life I needed.. It's HERE!!
 
Joined: Jan 2013
Posts: 1,065
Likes: 1
From: scotland
Default

Originally Posted by costina
I don't like lightened flywheels makes the car rev quick but the downside is less torque and possible rough idle. for a road car i would'nt bother dont forget if you do lighten your fly the make sure its all balanced

Taken from another forum:

The one negative of a lighter flywheel is that it makes taking off from a stop more difficult as there's less inertia. Otherwise, nothing but benefits as it 'frees' up power by reducing inertia and weight, makes rev-matching/downshifting easier as the engine revs more freely, and I'd guess that it lessens the wear on the clutch and tranny on shifts due to less inertia. BUT, it probably increases clutch wear a bit when starting from a stop as you'll need to slip the clutch a bit more.
well how do you think it would be with a 2wd flywheel on a 4x4 set up ? at idle it should not be rough but will maybe be a little harder to drive from a stop?
i have a pinto in the pickup atm and its flywheel is around 4kg and dont find it too bad to drive , but i do only drive it at the weekend so dont mind taking a hit on how it drives , just want to reduce lag as once cossie is in it i will be running a t34 .63 so would be nice to get rid of some lag
Reply