Just a little more of a update..Since it had stoppet raining today I thought i would do some more on the back end as this is what's holding me up at the mo.. At first sight it didnt look to bad.Cutting this bit out and putting a pice of plate in..
[/IMG]
[/IMG]
And cutting this bit out and putting a fresh bit of plate in
[/IMG]
There's some more tidying up to where the rear bumpper screw's on the lip of the arch
[/IMG]

But then trubble at first it did not look to bad
[/IMG]

But arfter cleaning it up with the wire brush on the grinder DISASTER
[/IMG]
So arfter drying my eye's I got to work sortting it out ..And this is what it look like arfter.
[/IMG]
There is a little more of tidying up 2 do with the grinder and where i gave it a good dose of rust preventer im going to leave it over night and plate it up tomorrow.so i got on with stripping the back brake's...
[/IMG]
And arfter getting the rear drum's off.. They look like they have seen better day's so im going 2 look into disc's instead.So i ended up takeing it all off
[/IMG]

Then i got on with the last job of the day as it was getting to dark and my light is pant's.
[/IMG]
[/IMG]

Cleaning up the rear end on the driver's side with my grinder then gave that a good dose of rust treatment i will let that dry over night then give it some primer.So that was my lot for today as long as it dont rain tomorrow i will crack on with some more