Originally Posted by
Mike Rainbird
Because I would eventually like to make some hubs for mine which would incorporate an extended knuckle for the TCA (like on the 3dr Cossies) to remove some of the inherent bump steer of the poorly positioned OE items
.
Ahh.. i see , yes i recon there is room for improvement in that department ..
I'd go for steel if you have them made, it's safer...
Just imagine for instance, alle the heat the hubs would accumulate from the brake discs, then you might end up in expansion leading to bearing failure and so on...
Surely they can be made up in a combo-solution of both steel and alu, but for me there was not time to experiment with that now..