Originally Posted by
fatbloke racing
I'd Thoroughly check the wiring loom especially where it goes through the bulk head. could well be chaffed through somewhere or rotten connection.
Also, you say the fuel pump works etc have you had the fuel pressure and regulator checked? I had the same fault on my saph a few years back and I found the regulator return to the fuel tank was blocked, would run then cut out...replaced reg all good
Originally Posted by
fatbloke racing
Hmmmm just had a thought, where is the reg on yours? I take it the problem is with the orion, I think the reg is by the fuel pump underneath at the rear???? Correct me if im wrong!
Swapped the regulator, so it's not that, as the other one worked fine on another car.
Originally Posted by
Dan16v
My old white series 2 used to do this, and im sorry but your AE must have shite equipment because mine was on a H plate and he diagnosed ecu pretty much straight away, changed it, and it was fine after that, so my bet is on your ECU, if its on OFAC I have one for sale
Yeah, I'm beginning to think the AE is a diddy, but he's the ONLY one around my area
The ECU is just standard Orion Ghia one, although I have an OFAB from a FRST in the garage waiting to go in
Originally Posted by
Stu @ M Developments
Potential chip module issue if its chipped.
It's not chipped dude, just standard ecu