Originally Posted by xr4x4rs

hopefully this will help you out



where the banjo bolts are you can see its leaking, you need to replace these with copper washers and tighten them up, but may need to clean the ends so they seal properly onto the turbo core

now if iim rite in what yuou have said, ive marked the bolts you refer too

if these are the bolts then all that does is old the exhaust housing of the turbo onto the core, there is no water in the back part, if there is you will know about it as your exhaust will be chucking white smoke out and that would should the water seals have gone inside the turbo, but there not as theres no signs around those bolts to show a water leak

the only part that has water round it is the centre piece where those banjo pipes are bolted on