Fully working rev counter taped to the cage

I had the springs that came with the avo coilovers, 320lb 8" front and 220lb 11" rear. They were too soft for the track. Fitted 500lb front and the 320lb on the rear. Worked ok but still too soft on the rear and they were too short causing the rear to be too low.
Added some shortened standard springs as well and that worked better so i have now got 400lb 12" on the rear. Not tried it yet but should be about right.
Also i run a 4x4 cossie rear roll bar 18mm and a Dohc sierra front roll bar.

Jacked it up to check the steering rack and with the front left less than 4" off the floor, only the opposite rear wheel was still on the floor . Think its stiff now