As said there are three in the door handle, or are you meaning the door release ?, if so there is on there, then just gently prise away "frame" part and slide around lever.
The door HANDLE CAPPING comes off with a smal screwdriver inserted at the front edge, then just pull back enough to grab hold of and wiggle it out.
One on fron tedge, two on rear edge, two on bottom of pocket, one around mirror, behind cap.
door card is on metal clips, if mirror plastic taken off above panel just lift the bottom out say 5" then sharp pull up and little wiggle, there are four metal clips it snaps into.
tabetha