New and unused. Comes with new (correct) injector, manifolds, bracket and a loom with resistorwhich will plug directly into a Cosworth loom.

You will need either a Pectel baord or a Motorsport Developments controler.

£250 plus £7 postage.

Every component in the picture is new and unused. The injector has the correct flow rate and is NOT a fluid injector like some people try and use (the fluid is used to cool the coil of the injector and they can overheat if used as an air to air injector). This can be fitted along with an Motorsport Developments controler or Pectel board and then mapped into the ECU