Axe wheels
#1
Too many posts.. I need a life!!
Thread Starter
Axe wheels
Hi all ,
I am in the process of buying some AXE EX3 rims for my three door and was wondering if the Yokohama advan neova AD08R 215/40/17 tyres will give me any rubbing issues?
The ride height is as standard using konis.
The wheel info is as follows-
17inch diameter
7.5inch wide
offset-35
Thanks for all help.
Cheers.
T
I am in the process of buying some AXE EX3 rims for my three door and was wondering if the Yokohama advan neova AD08R 215/40/17 tyres will give me any rubbing issues?
The ride height is as standard using konis.
The wheel info is as follows-
17inch diameter
7.5inch wide
offset-35
Thanks for all help.
Cheers.
T
The following users liked this post:
2Litre (27-08-2016)
#5
Too many posts.. I need a life!!
Thread Starter
I have changed my wheel order, Thank you very much martyhomer01 for the heads up. I have changed my order for a set of Team Dynamics IMOLA in Graphite satin finish 17inch/ ET37/7.5 wide/PCD 108 x 4.
Has anyone fitted these? Or had any problems on fitting them?
Thanks for all your input.
Tim
Has anyone fitted these? Or had any problems on fitting them?
Thanks for all your input.
Tim
#6
New Owner
the above should fit fine but I prefer 3dr cossies with staggered width and offset.
As a rough guide only.
Front et35 7.5"/8"
Rear et25 8/8.5"
This will fill the arches nicely without having to faff with spacers etc.
As a rough guide only.
Front et35 7.5"/8"
Rear et25 8/8.5"
This will fill the arches nicely without having to faff with spacers etc.
Last edited by Mad_Mat; 19-08-2016 at 10:23 PM.
#7
Too many posts.. I need a life!!
Thread Starter
Cheers Matt, I have played around so much will wheels over the years I just want something that is the same all round- Ie any wheel on any corner. I am only buying these to save my refured original wheels.
Cheers.
Tim.
Cheers.
Tim.
Thread
Thread Starter
Forum
Replies
Last Post
Fil
General Car Related Discussion.
38
20-06-2016 04:36 PM