Zetec turbo questions
#1
PassionFord Regular
Thread Starter
Join Date: Jan 2010
Location: kent
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Zetec turbo questions
Hello everyone, ive just built a 2.0 zetec turbo for my escort rs turbo il be aiming for about 300-350 so what injectors should i use? Im using omex 600 for management so i know they need to be high impendence ones, and a rover inlet so top fed injectors i would rather slightly bigger injectors then actaul needed so there not maxed out
Second question, do i need a icv as some people say to use them some say dont worry about them,
And third question, wheres best to get it mapped when its all up and running im from ashford kent,
Sorry for all the questions and cheers for any help
Second question, do i need a icv as some people say to use them some say dont worry about them,
And third question, wheres best to get it mapped when its all up and running im from ashford kent,
Sorry for all the questions and cheers for any help
#2
I'm Finding My Feet Here Now
Injectors I would be looking at astra vxr injectors 470cc high impedance top fed and about 100-120 brand new
ISCV no you don't necessarily need one they can run and idle ok without them depends on your own preference
I wouldn't recommend anywhere local myself (margate) I will be travelling to Essex.to get mine mapped probablt with Karlos but best bet is to ring round and find out who will map your car with your set up
ISCV no you don't necessarily need one they can run and idle ok without them depends on your own preference
I wouldn't recommend anywhere local myself (margate) I will be travelling to Essex.to get mine mapped probablt with Karlos but best bet is to ring round and find out who will map your car with your set up
#4
I'm Finding My Feet Here Now
I just used my fiesta rs turbo throttle body with my rover inlet dare say there's better options but can't see you fitting a much bigger tb to the inlet as the FRST is very close to the walls of the plenum
Trending Topics
#8
PassionFord Regular
Thread Starter
Join Date: Jan 2010
Location: kent
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Sweet thanks sbt83 looks like il be getting one of those throttle bodys studabear funny enough i got those injectors on my watch list on ebay lol, what are you running ??
#9
Too many posts.. I need a life!!
Hello fellow Ashfordite. I moved here about a year ago.
There is a company that I know of locally that could do mapping but im not sure if htey are that experienced with ford/omex.
How are you with RS turbos?
There is a company that I know of locally that could do mapping but im not sure if htey are that experienced with ford/omex.
How are you with RS turbos?
#10
PassionFord Regular
Thread Starter
Join Date: Jan 2010
Location: kent
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate, where abouts in kent are you then?? What company would that be?? Yea im pretty good with the rs turbos, just needed a litle help on the stuff i wasnt so sure about, nearly there now though
#11
Too many posts.. I need a life!!
This is the company I was on about http://www.fastroadconversions.com/contact.html. They said that they could map OMEX , or know someone that can, not sure on their reputation though never dealt with them. They might be able to get it to a stage where you can take it to one of the ford boys like Oddkid etc.
#13
PassionFord Regular
Thread Starter
Join Date: Jan 2010
Location: kent
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Hobomassiv - oh okay, i live near jct 11
Ive had bad things about them so i wont take it there, thanks though
Versus creations, il have a little look at them then, its getting close now to getting finished
Ive had bad things about them so i wont take it there, thanks though
Versus creations, il have a little look at them then, its getting close now to getting finished
Thread
Thread Starter
Forum
Replies
Last Post