ST170 Idle issues
#1
Virgin
Thread Starter
Join Date: May 2011
Location: london
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
ST170 Idle issues
Hi everyone
I hope someone can help, i have an st170 that is having idle issue, it is idil'ing high, about 1Krpm where it used to be 800rpm. Also if i rev it and then let of the accelerator it goes down to 1.8Krm, stays there for a second or two then goes back to 1Krpm.
I had the Idle control valve code pop up, so i replaced the unit for one off Ebay, i was assured it was working fine, but it is still coming up with the same problem and the light is still on, although it looks like it is pulling back at start up and staying back till 5k rpm.
does anyone have any ideas? seems a bit strange that both units are doing exactly the same thing.
Cheers
Jay
I hope someone can help, i have an st170 that is having idle issue, it is idil'ing high, about 1Krpm where it used to be 800rpm. Also if i rev it and then let of the accelerator it goes down to 1.8Krm, stays there for a second or two then goes back to 1Krpm.
I had the Idle control valve code pop up, so i replaced the unit for one off Ebay, i was assured it was working fine, but it is still coming up with the same problem and the light is still on, although it looks like it is pulling back at start up and staying back till 5k rpm.
does anyone have any ideas? seems a bit strange that both units are doing exactly the same thing.
Cheers
Jay
Last edited by jaimiemc; 22-03-2015 at 02:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM