ford p100 engine convension
#1
15000
Thread Starter
Join Date: Jul 2011
Location: cyprus
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
ford p100 engine convension
Hello guys, i own a p100 in cyprus it a 1,8td,
the whether is hot and overheated i crack 3 cylinder head of my engine, and i dont find parts in cyprus, my thoughts are tha put a more common engine for parts and not overheat, any ideas?
the whether is hot and overheated i crack 3 cylinder head of my engine, and i dont find parts in cyprus, my thoughts are tha put a more common engine for parts and not overheat, any ideas?
Last edited by socrates; 20-09-2014 at 09:23 PM.
#4
going sideways in a fwd
pinto also fitted into ford transit,
escort / mondeo /focus 1.8 zetec
+ mondeo and focus use 2litre zetec,
they are fuel injection units so many wires are needed,
but you can convert to carbs
escort / mondeo /focus 1.8 zetec
+ mondeo and focus use 2litre zetec,
they are fuel injection units so many wires are needed,
but you can convert to carbs
Trending Topics
#9
going sideways in a fwd
pinto requires very little electric wiring, , engine mounts will be simple to find
and they were carb engines so inlet manifolds with carbs will be cheapest
L4 engine and zetec require more parts , but very good units
the commonest ford engine in the scrapyard is possibly the cheapest
and they were carb engines so inlet manifolds with carbs will be cheapest
L4 engine and zetec require more parts , but very good units
the commonest ford engine in the scrapyard is possibly the cheapest
Thread
Thread Starter
Forum
Replies
Last Post