L1AM_RS

Hi guys,

Was wondering if anyone had a wiring diagram so I can hook my aftermarket head unit into the saph please?

I've got a right abortion of wires that have been hacked by a previous owner.

I want to hardwire the connections. Not interested in another ISO cable as the harness is already butchered :/..

andy2577

i wouldnt bother with a wiring diagram personally , get the multi meter out and have a play ,left car harness looks like speakers so they are easy enough to sort . right hand will be Live,switched live,earth,aux
Not too hard to work out Bud

rdvil

Diagram for a 1992 model, but some wires seem the same at least

dojj

iTrader: (3)

the ones on the left are the speaker wires so they are easy

the ones on the right are the power wires and, from memory you will have your brown earth, yellow ignition live, red/white permanent live, grey/yellow for illumination and another for the remote output

that's 4 wires taken care of but i think there are either 6 or 7 in total on that plug

L1AM_RS

Cheers,

Yeah i know the power, ground etc, just didnt know if anyone knew which speaker was which as i've left my multimeter at work so cant buzz them out.

dojj

iTrader: (3)

once you've got power then just hook up each speaker at a time to work out which ones which

L1AM_RS

Managed to get the power connected however when i turn the ignition off it resets itself.

Also the speakers are REALLY quiet? I have to crank the volume upto maximum to get faint decibels lol

dojj

iTrader: (3)

You haven't word the ignition and permanent lives up properly