Mk3 zetec conversion help please
#1
Virgin
Thread Starter
Join Date: Oct 2013
Location: London
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Mk3 zetec conversion help please
Hi, I have just put a 2.0 zetec into a mk3 escort, car turns over and starts on the button but when you try to rev it dies unless building revs up slowly, also rev counter idles at 3000rpm, any help would be great, thank you
#2
throttle posiition sensor faulty?? did u hear it running perfectly before u put it in the mk3?? also is the idle 3k or just says it on clocks wile idling is normal? idle control valve faulty?
#3
Not Crazy, just Unwell
I'd go for cleaning the idle control valve and throttle body then look to tps and Mass airflow sensors are temperamental so may be worth having a look at that too
#4
Virgin
Thread Starter
Join Date: Oct 2013
Location: London
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thanks will try that and see what happens, engine idles normal but rev counter says 3000, also some people say you need lambda sensor connected some say you don't, also a friend has 1.8 conversion without lambda connected with no problems, any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM