Ford focus rear disc pads
#1
Virgin
Thread Starter
Join Date: Mar 2013
Location: Southport
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Ford focus rear disc pads
I have removed the disc pads from the rear of my Ford Focus 1.8 TDi 2006
The pads I have bought have 2 metal studs on the back one of each pair, the ones I removed do not it seems the removed pads have a spring layout on the back very thin, that clips around the callipers piston, at first I thought they may have been modified so the 2 studs slotted into the face of the piston but then thought because the pistons needed to turn to be retracted back for the new pads to be fitted that the piston would also have to turn as the pads wore down and if the slots where fixed to the piston this would not allow it to turn outwards. am I right and therefore have the wrong pads?
The pads I have bought have 2 metal studs on the back one of each pair, the ones I removed do not it seems the removed pads have a spring layout on the back very thin, that clips around the callipers piston, at first I thought they may have been modified so the 2 studs slotted into the face of the piston but then thought because the pistons needed to turn to be retracted back for the new pads to be fitted that the piston would also have to turn as the pads wore down and if the slots where fixed to the piston this would not allow it to turn outwards. am I right and therefore have the wrong pads?
Thread
Thread Starter
Forum
Replies
Last Post
jason_nike
Ford Sierra/Sapphire/RS500 Cosworth
9
18-08-2019 10:53 AM
Graceland
Non Ford parts & other stuff for sale
1
31-07-2015 10:34 AM