pms0010

hi i have just done a 1800 zetec conversion into my mk5 1991 cabriolet to get rid of the old cvh
the engine box etc all came from a 1998 gti i have used a mondeo non pats ecu and changed the pins about to suit but the bit i am having trouble with is the 12 pin connector that connects from the engine to the car loom
can any one tell me the wiring diagram or where to connect these to please

pin1.violet/blue
pin2.black/blue
pin3.black/white
pin4.black/green
pin5.violet/blue
pin6.white/green
pin7.orange/yellow
pin8.violet/yellow
pin9.violet/white
pin10.violet/blue
pin11.black/yellow
pin12.red/white

thanks in advance