Need someone to inspect there ST170 engine!
#1
15000
Thread Starter
Join Date: Oct 2010
Location: Chelmsford
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Need someone to inspect there ST170 engine!
The photo shows a vac hose with a bung in it, which has stopped the rough idle, I need to find out if its mean't to have a hose fitted and if so where does it come from.
It will take someone 30 secs to look please? it's at back of engine below rear of throttle body, one small vac pipe and one big pipe.
Thanks
Dan
It will take someone 30 secs to look please? it's at back of engine below rear of throttle body, one small vac pipe and one big pipe.
Thanks
Dan
#2
I'm Finding My Feet Here Now
Join Date: May 2012
Location: Outthere
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Sorry it took a while, cleaned my throttle body today so had a gander and took a photo as I'm not very knowledgable and can't see too muh in your piccy
If it is the circled one, it is a 90 degree angle one then has a smaller cable coming out of it. This then runs to the left side of the engine by the bulk head. Goes into a black plastic cylinder that's attached to the bulk head at the back of the engine.
If it is the circled one, it is a 90 degree angle one then has a smaller cable coming out of it. This then runs to the left side of the engine by the bulk head. Goes into a black plastic cylinder that's attached to the bulk head at the back of the engine.
Thread
Thread Starter
Forum
Replies
Last Post
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM