Cosworth yb main bearing bolts loctite or oil threads ?
#1
Wahay!! I've lost my Virginity!!
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: mansfield
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Cosworth yb main bearing bolts loctite or oil threads ?
As title. Whats the correct procedure please ?
Manual says in notes loctite 270 but says oil threads when on the rebuild page.
Thanks
Manual says in notes loctite 270 but says oil threads when on the rebuild page.
Thanks
#2
I've found that life I needed.. It's HERE!!
Oil the threads and underside of the bolt head. Torque to 75 lb/ft.
On main cap #5, run a small line of RTV sealant along the 2 edges in the block before fitting the cap, clean up any excess that squeezes out once torqued down.
On main cap #5, run a small line of RTV sealant along the 2 edges in the block before fitting the cap, clean up any excess that squeezes out once torqued down.
Thread
Thread Starter
Forum
Replies
Last Post
germanfrstdriver
Ford Sierra/Sapphire/RS500 Cosworth
32
14-07-2015 07:55 PM