Track mk3 Fiesta suspension alignment.
#1
Virgin
Thread Starter
Join Date: Mar 2006
Location: Madrid (Spain)
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Track mk3 Fiesta suspension alignment.
Hello everyone.
I'm building a full track fiesta and i want to know if anyone could give me an advise on suspension castor, camber and toe, as a starting values. I've searched the forum and i more or less found it must be somewhat like:
Front. 2~3 camber, 2mm toe in, caster as much as i can get
Rears. 0.5~1 camber, 1mm toe out.
I also know there is a fiesta challenge competition, so if anyone could tell me which values they roughly use?
The car runs on Gaz golds, 450lbs on front and 550lbs on the rear. Front adjustable whisbones and rear mk5 fiesta shimmed beam. I suppose the engine and other mods doesnt matter so much.
Regards
I'm building a full track fiesta and i want to know if anyone could give me an advise on suspension castor, camber and toe, as a starting values. I've searched the forum and i more or less found it must be somewhat like:
Front. 2~3 camber, 2mm toe in, caster as much as i can get
Rears. 0.5~1 camber, 1mm toe out.
I also know there is a fiesta challenge competition, so if anyone could tell me which values they roughly use?
The car runs on Gaz golds, 450lbs on front and 550lbs on the rear. Front adjustable whisbones and rear mk5 fiesta shimmed beam. I suppose the engine and other mods doesnt matter so much.
Regards
Thread
Thread Starter
Forum
Replies
Last Post
Dr. Ickxs
Ford Escort RS Turbo
2
15-09-2015 10:15 PM
andrewmctiernan
General Car Related Discussion.
0
08-09-2015 03:05 PM