Uprated clutch for Saph Cós.
#1
Too many posts.. I need a life!!
Thread Starter
Uprated clutch for Saph Cós.
Hi just want to ask opinions on clutches...I currently run a uprated AP organic kit, but when getting on full boost it slips....so what do you guys use ?
Car is a 2wd Saph running close to 380bhp and 500+ torque .... estimated, but the clutch slips so any advice would be nice ...
Car is a 2wd Saph running close to 380bhp and 500+ torque .... estimated, but the clutch slips so any advice would be nice ...
#2
Too many posts.. I need a life!!
iTrader: (4)
Join Date: Apr 2006
Location: isle of wight
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
I have a 4x4 saph running gt30 turbo , 2 bar of boost, 400+ not set up yet. I have an AP 6 paddle clutch kit. It isn't very nice for town/city driving but you could bet your life it won't ever slip when you put your foot down. Personally When I uprate my gearbox I shall get a hydraulic clutch conversion which should make it alot smoother.
#3
The hydraulic will also make it MUCH MUCH lighter.
I've got mine turned down to 300bhp or so at the mo, but with std cover and plate doesn't slip.
I would go for an alcon 6 paddle.
tabetha
I've got mine turned down to 300bhp or so at the mo, but with std cover and plate doesn't slip.
I would go for an alcon 6 paddle.
tabetha
Thread
Thread Starter
Forum
Replies
Last Post