Fiesta st 2.0 duratec air con delete
#1
Virgin
Thread Starter
Join Date: May 2010
Location: glasgow
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Fiesta st 2.0 duratec air con delete
Hi everyone, I'm removing the aircon pump from my St race car project. I've been told that there is a Ford produced jockey wheel that will replace this. Does anyone know the part number? I presume it's off the same engine in a different car.
Thanks, Phil.
Thanks, Phil.
#2
Regular Contributor
It's this one but doubt he will give you the part number
http://www.sico-developments.co.uk/p...on-removal-kit
Just a guess... could be from one of the Mondeo models without AC
If not on here, someone on one of the ST forums might know the part #
http://www.sico-developments.co.uk/p...on-removal-kit
Just a guess... could be from one of the Mondeo models without AC
If not on here, someone on one of the ST forums might know the part #
Last edited by _Jimmy_; 27-10-2016 at 02:12 PM.
#3
Virgin
Thread Starter
Join Date: May 2010
Location: glasgow
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I've got a bit closer to solving this, I found this link http://turborangerforums.com/showthread.php?t=7455
The fiesta engine looks very similar to the green engine. I've googled the part number which comes up with options in America but it looks like it is shared with a 2010 focus 2.0 as far as I can see.
The fiesta engine looks very similar to the green engine. I've googled the part number which comes up with options in America but it looks like it is shared with a 2010 focus 2.0 as far as I can see.
#4
Virgin
Thread Starter
Join Date: May 2010
Location: glasgow
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Went to ford garage but they still couldn't find the part.
I've found this: http://pdhomes.net/diy/tondelayo/pzev/serpentine_belt_diagrams.html
So the part I'm wanting is the idler pulley. Any ideas?
I've found this: http://pdhomes.net/diy/tondelayo/pzev/serpentine_belt_diagrams.html
So the part I'm wanting is the idler pulley. Any ideas?