stevieel

is there anyone other than burtons who do a hydraulic conversion for the 2wd sierra cossie box?


Steve

Puss2

iTrader: (5)

Mr rainbird does them.
Bottom of page.


http://www.randbmotorsport.co.uk/sho...ID=3&offset=10

purplemonster

martyn also dose them


or make your own like i did

stevieel

sorry for my ignorance but who is martyn?

Steve

Simmo

iTrader: (20)

http://www.reyland.co.uk/Details.asp?ProductID=56

stevieel

thanks for that

Niall.b

i got mine from reyland. its a good kit but theres a bit of work to fitting it. the crucial things are getting the position of the master cylinder in the bulkhead right and the pivot bearing in the clutch pedal. if these are wrong you will never get a pedal. on the plus side operation is much smoother particularly with a paddle clutch

Martin-Hadland

iTrader: (2)

As already mentioned I do a kit (can fit if needed too) ... Give me a call if you need any further info 0121 458 6010, Martin.