CozzyKing

iTrader: (2)

Hi all, iv'e just bought a p reg mk4 fiesta with a knackered 1.4 zetec se lump in it replaced it with another and found that was knackered too so before i get too dissheartened with the car and smash the living day lights out of it i was wondering whether anyone had fitted a mondeo 2.0 engine to one at all and if so what parts do i need to change.

If anyone can help me i'd be very greatful.
Cheers Shaun.

djmillsy

http://www.zetecinside.com/xr2/index.htm


try in there mate its easy you only need a few bits

CozzyKing

iTrader: (2)

Cheers mate unfortunately that site has no relevent info to the conversion.

djmillsy

the stuff for the mk1 should be the same as yours ie need 1.6 sump and waterpump etc its will drop straight in but you need to modify the top mount

CozzyKing

iTrader: (2)

the mount problem may be my down fall as i cant and dont know anyone who can help me either.

djmillsy

there is a step by step guide somewhere ill look it out for you later its one bolt that doesnt line upp but plenty have done this have you asked on any fiesta forums

CozzyKing

iTrader: (2)

I hav'nt mate but the mk4 fiesta uses totaly different engine mounting points i think as from what i'm aware the mk3 is at the back on the block and my engine mount comes off the front of the head.

ZVH,RST

you have to make a mounting bracket up for the engine mount, i used a mk4 escort complete engine mount and it bolted to the silver top,mondeo zetec engine block, then welded some thick tube, steel plate to the inner wing for the escort mount to mount to, that was on a w,reg mk4 fiesta,

CozzyKing

iTrader: (2)

Nice one mate you didnt take any pics when you did it did you by any chance?

stevegarb29

Im doing the same to my r reg mk4 im gona put a silvertop in & get it turbo'd . Just need to find some1 to do the turbo conversion ?

Stage6

you'll struggle to find any decent mk4/5 2.0 conversion guides or answers... as they all vary.

A lad on facebook used to make the mounts for said engine swap, his name was jordan cartwright i believe, could give him a message see if anything can be done...he owned a blue mk5 zs with a 2.1 zetec turbo lump in it.

Or you could make a template out of the mount you need with some card, and take it to a metal work place to get made in metal.

Richie15

http://www.zsoc.com/showthread.php?t=155624

This should help you out, I've done this conversion but turbo aswell in a mk5 fiesta, best thing I've ever done

Churtz

It's not too tough of a job to do....If you're happy welding/fabricating mounts. It's by no means a bolt in conversion.

I've got a mk4 fiesta with a 300bhp blacktop zetec turbo engine with focus rs rods and pistons. Focus rs gearbox and custom drive shafts.

Matt.

stevegarb29

Thanx I will have to get the mounts made .. but should b able to do the rest myself .
Ive pm'd u did u get it ?

Thanx
Steve

Churtz

Hi mate. Yeah I got your message, I've been burnt before so I don't let people come and look at the car that I don't know..... but ill happily answer any questions you've got. In fact, I know of a guy that had one amounts for sale for this conversion. I'll dig his number out.

stevegarb29

No worries mate I appreciate that . If u could get his no. That would b great . I prob will have some questions for u . But the car is on hold till after crimbo

Churtz

No worries. He's still got them for sale. And only wants £100 for the whole set. Makes it a bolt in conversion. If I remember right the car went to pumaspeed and they fabricated them. I only know him from buying a gearbox from him. Seems a real genuine guy and he had a few other mk4 fiesta bits too!! Can't remember his name but this is his number.

07717 172145