Miller 3

iTrader: (4)

Thought I'd post some pics of a project I'm doing of a mk1 fiesta that my cousin bought as a rolling shell, it's a known car as it was the first to have a zetec fitted and now we have put in a 1.6l ecoboost from the new fiesta st 180, we have chucked on the new tt turbo and hope to be running 300+ hp on the new syvecs S8GDI engine management..












Twin side exit exhaust

costina

iTrader: (1)

That is a very compact engine. Is it the same size in the 2.3 form ?

Miller 3

iTrader: (4)

Not too sure bud, it sits a tad too far forward in the bay for my liking but unless we went for a space frame front end that is where it will stay ��

youngben

iTrader: (2)

Believe the 2.3 is the same basic sizing as an Duratec engine and Ecoboost 2l and 2.3l

This engine looks to be derived from the 1.25, 1.4, 1.6 & 1.7 Sigma engines?

Nice to see what is happening with this car! Was very tempted myself.

Miller 3

iTrader: (4)

Just doing the wiring for the ecu at the moment and the car is going back to have the exhaust finished tomorrow for a couple of days... would love to have it running by April so it's full steam ahead..

lacey

My mate has a 1.6 ecoboost in his s2 rst
And I am putting one in a 3dr Sierra
As they don't weigh a lot and give good results

Caddyshack

Looks nicely done, I like the simple engine mounts, are the mounts totally bespoke or something that you have adapted? Should be a quick car with that in there.

Miller 3

iTrader: (4)

Has he got any info on the sensors and wiring?

Miller 3

iTrader: (4)

There bespoke items bud, yes should be a hoot to drive especially with the modern traction control

ajamesc

Young lad at work has just got a new shape st on finance go's well for what it is to be fair

lacey

I will ask
But I think he is on the std Ecu as you can get good
Power out of them

Miller 3

iTrader: (4)

I would doubt he is on the standard ecu as you would have to run the whole loom, dash clocks the lot?
And there are only a handful of ecu capable of running the Gasoline direct injection..

turbo m

iTrader: (2)

Is that the zetec inside fiesta??Was a race car??

Been reading about this engine in classic ford..

Miller 3

iTrader: (4)

Yes pal, we bought it as a rolling shell

gcfcos

Awesome looking project! I remember the car from the magazines

studabear

Very cool project, keep the updates coming.

mark

Well built car to start with should be even more fun with that engine in it doug

Tev

iTrader: (2)

like the look of this!!!!

Rowe

impressive this! it's something i've been thinking of doing myself, but retaining the original loom and clocks etc.

Miller 3

iTrader: (4)

......

Miller 3

iTrader: (4)

Side tail pipes

Glenn_

iTrader: (1)

What a class project this is.

Zetec_mk4_XR3i

Great project, will go like the wind with that lump! Love how compact and neat it looks.

What gearbox are you using?

Miller 3

iTrader: (4)

Ib6 6 speed

XRT_si

iTrader: (2)

Awesome that!

How hard was it getting hold of an engine?

It's Czech Mate

Loved this car back in the day, wonder what the old owner has gone onto now?

XRT_si

iTrader: (2)

Something a little different...

It's Czech Mate

Yeah i just popped onto zetecinside to have a look. Good stuff

Miller 3

iTrader: (4)

Easy, got it from a mutual friend

twister

Just wondering if your using the standard loom and Ecu ?

Miller 3

iTrader: (4)

No mate, we was going to build a loom ourselves but we are now getting one done by sileck motorsport wiring... and it is going on a syvecs S8 GDI4 ucu.

Ta

Miller 3

iTrader: (4)

Miller 3

iTrader: (4)

Miller 3

iTrader: (4)

Got the car back from having the exhaust finished off next stage is to get the motorsport engine loom made..

Glenn_

iTrader: (1)

Is that boot spoiler staying. Whos doing the loom? James?

Miller 3

iTrader: (4)

I think it is going to stay mate yes, I really wasn't keen on it before but it's kinda grown on me and it's only there for a reason.. me and James was going to do a loom for it but now we are getting a loom made by sileck motorsport wiring as he has all the conecters in stock and has done a few of these before so already has drawings ready to go so it kinda makes sense 😀
Me and James will still do the bits inside the car that need changing/moving 👍

lacey

Spoke to Sbd at the autosport Thursday as I have done parts for Steve in the past
And he among others had 1.6 ecoboost engines on show
He has a Ecu and loom to plug and play which takes the engine
To 300hp/300lbft
It's not cheap tho
And jenvey do a nice inlet which was on the same engine
Which also allows you to fit 4 extra injectors nicely
As he said that the injectors are near there limit

I know some people have got more power
But a plug and play kit is good news

Rowe

not sure whether you've made the loom yet, but i came across this the other day: http://twinkam.co.uk/epages/191f6b26...Products/SC353

seems that they will do a standlone loom for not a great deal of money

Miller 3

iTrader: (4)

Yes I have seen that but after we had ordered our syvecs ecu so we are committed to going that route now, we was going to build our own loom in house but we have now ordered a full on motorsport loom from Sileck motorsport wiring so at least we are moving in the right direction, and thanks for the link 👍 at least all this will benefit others 😁

Caddyshack

Looks fantastic